
For circuits requiring a 5 A protection point, Littelfuse 0443005.DR provides time-lag (Slo-Blo) overcurrent protection in the NANO2 high-voltage SMD (approx. 10.1 × 3.1 mm) platform. The rating is suited to LED lighting systems, provided the startup waveform and ambient rerating are checked against the latest curves. Its 50 A @ 250 VAC; 100 A @ 125 VDC; 500 A @ 60 VDC interrupting specification supports fault-current coordination when the applied voltage remains within 250 VAC.
| Parameter | Value |
|---|---|
| Manufacturer / Series | Littelfuse / 443 Series |
| Part number | 0443005.DR |
| Fuse characteristic | time-lag (Slo-Blo) |
| Rated current | 5 A |
| Voltage rating | 250 VAC |
| Interrupting rating | 50 A @ 250 VAC; 100 A @ 125 VDC; 500 A @ 60 VDC |
| Nominal cold resistance | 0.0115 Ω |
| Nominal melting I²t | 180.6 A²s |
| Package | NANO2 high-voltage SMD (approx. 10.1 × 3.1 mm) |
| Operating temperature | -55 °C to +125 °C |
| Agency / environmental | UL Recognized, CSA Certified, IEC/EN 60127 compliant, RoHS compliant and halogen-free |
For continuous service, begin the design review at no more than 75% of the 5 A rating, then apply the temperature-rerating curve and confirm the time-current response against startup and fault waveforms. The percentage is a design starting point, not a substitute for application testing.
Check that the prospective fault current stays within 50 A @ 250 VAC; 100 A @ 125 VDC; 500 A @ 60 VDC at the applied voltage. Use the manufacturer-recommended land pattern for the NANO2 high-voltage SMD (approx. 10.1 × 3.1 mm) package and validate thermal behavior on the intended copper layout.
What distinguishes 0443005.DR within the 443 Series?
Its defining electrical point is 5 A with a 250 VAC maximum rating and time-lag (Slo-Blo) opening behavior.
Can 0443005.DR be chosen by current rating alone?
No. Normal load, ambient temperature, pulse energy, time-current behavior and available short-circuit current all affect suitability.
Is 0443005.DR intended for automated PCB assembly?
Yes. It is a surface-mount fuse; follow the latest soldering profile, pad layout and orientation guidance for the NANO2 high-voltage SMD (approx. 10.1 × 3.1 mm) construction.
Packaging: 1,500 pieces on 24 mm tape-and-reel; quantity/packaging code DR.
Ordering reference: start with 0443005.DR and confirm the exact reel, termination and compliance suffix against current stock before purchase.
Design note: Resistance and I²t values are nominal unless identified as ratings. Verify the latest Littelfuse data sheet and curves before final release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd