Welcome to our company!
170M8510 Eaton Bussmann 1000V 1000A Class aR High Speed Fuse
Share
Eaton Bussmann 170M8510 — 1000V 1000A Class aR high speed fuse, 100 kAIC interrupting. Protects semiconductors in drives, rectifiers and inverters.
- Product Details
- Download
170M8510 Eaton Bussmann 1000V 1000A Class aR High Speed Fuse
At a Glance
- 1000 V (IEC) rated voltage, 1000 A rated current
- 100 kAIC interrupting rating
- Class aR time-current characteristic
- Centre fuse status indicator
The Eaton Bussmann 170M8510 is a square body fuse with 1000 V (IEC) rated voltage, 1000 A rated current, 100 kAIC interrupting capacity, carrying a Class aR time-current characteristic. Construction is centre fuse status indicator.
Specifications
General specifications
| EAN | 5027590465243 |
| UPC | 051712603850 |
| Product Length/Depth | 90 mm |
| Product Height | 74 mm |
| Product Width | 160 mm |
| Product Weight | 915 g |
Electrical data
| Amperage Rating | 1000 A |
| Class | Class aR |
| Clearing (I2T) | 2050000 at 1000 V |
| Interrupt rating | 100 kAIC |
| Pre arc (I2T) | 340000 |
| Voltage rating | 1000 V (IEC) |
| Watt losses | 150 W |
Product specifications
| Application | Semiconductor, DC Common bus, DC drives, power converters/rectifiers |
| Fitted with: | Type K Indicator for micro |
| Fuse indicator | Centre fuse status indicator |
| Fuse size | 3 |
| Fuse type | Flush end GKN/Type K indicator for micro |
Series Selection Table
Applications
- Industrial equipment
Selection Notes
- Check the voltage rating against the system voltage, and the interrupting rating against the available fault current, before specifying.
Common Questions
What are the ratings of the Eaton Bussmann 170M8510?
1000 V (IEC) / 1000 A, with a 100 kAIC interrupting rating.
How much fault current can the 170M8510 interrupt?
100 kAIC. The available fault current at the installation point must not exceed this value.
What does Class aR mean for the 170M8510?
Class aR defines the fuse's time-current characteristic. E-rated fuses carry a defined melting curve so they coordinate predictably with upstream and downstream devices; mixing E and non-E ratings in one feeder defeats that coordination.
How should I select the 170M8510 for a circuit?
Match the voltage rating to the system voltage, keep the continuous current above the load current, and check that the interrupting rating exceeds the available fault current. In medium voltage work, select on the transformer or feeder fault level rather than the load current alone.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
