2CLE-200E Eaton Bussmann 2.4kV 200A Class E Medium Voltage Fuse
2CLE-200E Eaton Bussmann 2.4kV 200A Class E Medium Voltage Fuse

2CLE-200E Eaton Bussmann 2.4kV 200A Class E Medium Voltage Fuse

Share
pEaton Bussmann 2CLE-200E, 2.4kV 200A Class E medium voltage fuse, 50 kAIC interrupting. For transformer, feeder and switchgear protection./p
    • Product Details
    • Download

    2CLE-200E Eaton Bussmann 2.4kV 200A Class E Medium Voltage Fuse

    At a Glance
    • 2.4 kV rated voltage, 200 A rated current
    • 50 kAIC interrupting rating
    • Class E time-current characteristic

    The Eaton Bussmann 2CLE-200E is a fuse with 2.4 kV rated voltage, 200 A rated current, 50 kAIC interrupting capacity, carrying a Class E time-current characteristic.

    Specifications

    General specifications
    UPC051712527330
    Product Length/Depth10.9 in
    Product Height3 in
    Product Width3 in
    Product Weight9 lb
    Electrical rating
    Amperage Rating200 A
    Interrupt rating50 kAIC
    Voltage rating2.4 kV
    General information
    ClassClass E
    Special featuresSingle barrel, Indoor

    Applications

    • Energy and utility distribution
    • Industrial equipment
    • Photovoltaic systems

    Selection Notes

    • Check the voltage rating against the system voltage, and the interrupting rating against the available fault current, before specifying.

    Common Questions

    What are the ratings of the Eaton Bussmann 2CLE-200E?
    2.4 kV / 200 A, with a 50 kAIC interrupting rating.
    How much fault current can the 2CLE-200E interrupt?
    50 kAIC. The available fault current at the installation point must not exceed this value.
    What does Class E mean for the 2CLE-200E?
    Class E defines the fuse's time-current characteristic. E-rated fuses carry a defined melting curve so they coordinate predictably with upstream and downstream devices; mixing E and non-E ratings in one feeder defeats that coordination.
    How should I select the 2CLE-200E for a circuit?
    Match the voltage rating to the system voltage, keep the continuous current above the load current, and check that the interrupting rating exceeds the available fault current. In medium voltage work, select on the transformer or feeder fault level rather than the load current alone.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message