3216FF10-R 10 A 1206 (3216 metric) Fast-Acting SMD Fuse | 24 Vdc | Eaton Bussmann
3216FF10-R 10 A 1206 (3216 metric) Fast-Acting SMD Fuse | 24 Vdc | Eaton Bussmann

3216FF10-R 10 A 1206 (3216 metric) Fast-Acting SMD Fuse | 24 Vdc | Eaton Bussmann

Share
3216FF10-R: 10 A 1206 fast-acting SMD fuse chosen for 10 A 24 Vdc secondary-protection paths on compact power boards; 24 Vdc, 150 A DC interrupting rating.
    • Product Details
    • Download

    Eaton Bussmann 3216FF10-R 10 A 24 VDC Fast-Acting 1206 SMD Fuse

    The Eaton Bussmann 3216FF10-R is a 10 A fast-acting Chip™ fuse in a 3216 metric (1206 imperial) surface-mount package. It is rated at 24 VDC with 150 ADC interrupting capability. The 10 A version begins the high-current, DC-only portion of the series. It is not within the 250 mA to 7 A AEC-Q200-qualified range, so it should be selected for current capacity and 24 VDC fault performance rather than automotive qualification.

    Best fit: protecting 10 A, 24 VDC PCB power paths with 150 ADC interrupting capability. Key check: confirm the normal load, startup waveform, available fault current and ambient-temperature derating before approval.

    Why Choose This Rating

    • 10 A fast-acting protection for 24 VDC circuits
    • Typical cold resistance of 0.0045 Ω and typical voltage drop of 0.062 V
    • Typical melting I²t of 2.0 A²s for pulse and coordination review
    • This rating is outside Eaton's stated 250 mA to 7 A AEC-Q200-qualified range
    • Halogen-free, lead-free and RoHS compliant; MSL 1

    Core Specifications

    ParameterValue
    Manufacturer / SeriesEaton Bussmann series / 3216FF
    Part number3216FF10-R
    Fuse characteristicFast-acting
    Rated current10 A
    AC voltage ratingNot rated
    DC voltage rating24 VDC
    Interrupting rating150 ADC
    Typical DC cold resistance0.0045 Ω
    Typical melting I²t2.0 A²s
    Typical voltage drop0.062 V
    Body marking10
    Package1206 imperial / 3216 metric SMD
    Operating temperature-55 °C to +125 °C
    Agency / environmentalcURus recognized; CSA component accepted; RoHS compliant; halogen-free; lead-free

    Best-Fit Applications

    • 24 VDC power-distribution boards
    • High-output converter and load branches
    • Compact battery-powered equipment

    Selection Guidance

    The fuse is designed to carry rated current for at least four hours under the datasheet test conditions. Eaton recommends an operating current of 80% or less of the 10 A rating, with additional derating at elevated ambient temperature. That guideline is not a substitute for checking the time-current curve against startup and fault waveforms.

    For PCB design, use the manufacturer-recommended land pattern and mount the ceramic (white) side facing up. Also verify that the prospective fault current does not exceed 150 ADC at the applied voltage.

    Frequently Asked Questions

    Is 3216FF10-R AEC-Q200 qualified?
    No qualification should be inferred for this rating; Eaton limits the stated AEC-Q200 range to 250 mA through 7 A.

    Can it run continuously at 10 A?
    Designing at or below about 80% of rated current is recommended, followed by temperature and waveform validation.

    Is this a high-inrush fuse?
    It is a fast-acting fuse. If the load has significant inrush, compare the pulse energy and time-current profile with the curves rather than selecting by current rating alone.

    Ordering and Packaging

    Packaging: TR prefix, 3,000 fuses on 8 mm tape-and-reel, 7-inch (178 mm) reel, EIA-481.

    Ordering reference: specify the packaging code with the product code, for example TR/3216FF10-R. Confirm the exact orderable code and stock status before purchase.

    Design note: Electrical values are typical unless identified as ratings. Verify the latest Eaton datasheet and design curves before final release.

    Mechanical Dimensions

    eaton-3216ff-surface-mount-fuse-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message