3216FF3-R 3 A 1206 (3216 metric) Fast-Acting SMD Fuse | 32 Vac/63 Vdc | Eaton Bussmann
3216FF3-R 3 A 1206 (3216 metric) Fast-Acting SMD Fuse | 32 Vac/63 Vdc | Eaton Bussmann

3216FF3-R 3 A 1206 (3216 metric) Fast-Acting SMD Fuse | 32 Vac/63 Vdc | Eaton Bussmann

Share
3216FF3-R: 3 A 1206 fast-acting SMD fuse chosen for higher-load control and distribution branches in compact equipment; 32 Vac/63 Vdc, 50 A interrupting rating, AEC-Q200 qualified.
    • Product Details
    • Download

    Eaton Bussmann 3216FF3-R 3 A 32 VAC / 63 VDC Fast-Acting 1206 SMD Fuse

    The Eaton Bussmann 3216FF3-R is a 3 A fast-acting Chip™ fuse in a 3216 metric (1206 imperial) surface-mount package. It is rated at 32 VAC / 63 VDC with 50 AAC/ADC interrupting capability. The 3 A version is a versatile selection for electronic power branches. It offers a useful balance between current capacity, voltage headroom and fast fault interruption for loads without severe startup inrush.

    Best fit: protecting general-purpose 3 A PCB rails that need a fast-acting fuse and up to 63 VDC capability. Key check: confirm the normal load, startup waveform, available fault current and ambient-temperature derating before approval.

    Why Choose This Rating

    • 3 A fast-acting protection for 32 VAC / 63 VDC circuits
    • Typical cold resistance of 0.036 Ω and typical voltage drop of 0.13 V
    • Typical melting I²t of 0.275 A²s for pulse and coordination review
    • AEC-Q200 qualified within Eaton's 250 mA to 7 A range
    • Halogen-free, lead-free and RoHS compliant; MSL 1

    Core Specifications

    ParameterValue
    Manufacturer / SeriesEaton Bussmann series / 3216FF
    Part number3216FF3-R
    Fuse characteristicFast-acting
    Rated current3 A
    AC voltage rating32 VAC
    DC voltage rating63 VDC
    Interrupting rating50 AAC/ADC
    Typical DC cold resistance0.036 Ω
    Typical melting I²t0.275 A²s
    Typical voltage drop0.13 V
    Body marking3
    Package1206 imperial / 3216 metric SMD
    Operating temperature-55 °C to +125 °C
    Agency / environmentalcURus recognized; CSA component accepted; RoHS compliant; halogen-free; lead-free

    Best-Fit Applications

    • Industrial and automotive control modules
    • LED drivers and regulated power supplies
    • Battery-management and charging branches

    Selection Guidance

    The fuse is designed to carry rated current for at least four hours under the datasheet test conditions. Eaton recommends an operating current of 80% or less of the 3 A rating, with additional derating at elevated ambient temperature. That guideline is not a substitute for checking the time-current curve against startup and fault waveforms.

    For PCB design, use the manufacturer-recommended land pattern and mount the ceramic (white) side facing up. Also verify that the prospective fault current does not exceed 50 AAC/ADC at the applied voltage.

    Frequently Asked Questions

    Is 3216FF3-R AEC-Q200 qualified?
    Yes. Its current rating falls within Eaton's stated 250 mA to 7 A qualified range.

    Can it run continuously at 3 A?
    Designing at or below about 80% of rated current is recommended, followed by temperature and waveform validation.

    Is this a high-inrush fuse?
    It is a fast-acting fuse. If the load has significant inrush, compare the pulse energy and time-current profile with the curves rather than selecting by current rating alone.

    Ordering and Packaging

    Packaging: TR prefix, 3,000 fuses on 8 mm tape-and-reel, 7-inch (178 mm) reel, EIA-481.

    Ordering reference: specify the packaging code with the product code, for example TR/3216FF3-R. Confirm the exact orderable code and stock status before purchase.

    Design note: Electrical values are typical unless identified as ratings. Verify the latest Eaton datasheet and design curves before final release.

    Mechanical Dimensions

    eaton-3216ff-surface-mount-fuse-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products