
The Eaton Bussmann 3216FF30-R is a 30 A fast-acting Chip™ fuse in a 3216 metric (1206 imperial) surface-mount package. It is rated at 24 VDC with 300 ADC interrupting capability. This is the highest-current device in the series and carries a 300 ADC interrupting rating. It is designed for space-sensitive high-current boards, with final suitability dependent on fault-current, thermal and PCB-layout checks.
| Parameter | Value |
|---|---|
| Manufacturer / Series | Eaton Bussmann series / 3216FF |
| Part number | 3216FF30-R |
| Fuse characteristic | Fast-acting |
| Rated current | 30 A |
| AC voltage rating | Not rated |
| DC voltage rating | 24 VDC |
| Interrupting rating | 300 ADC |
| Typical DC cold resistance | 0.0012 Ω |
| Typical melting I²t | 43 A²s |
| Typical voltage drop | 0.068 V |
| Body marking | 30 |
| Package | 1206 imperial / 3216 metric SMD |
| Operating temperature | -55 °C to +125 °C |
| Agency / environmental | cURus recognized; CSA component accepted; RoHS compliant; halogen-free; lead-free |
The fuse is designed to carry rated current for at least four hours under the datasheet test conditions. Eaton recommends an operating current of 80% or less of the 30 A rating, with additional derating at elevated ambient temperature. That guideline is not a substitute for checking the time-current curve against startup and fault waveforms.
For PCB design, use the manufacturer-recommended land pattern and mount the ceramic (white) side facing up. Also verify that the prospective fault current does not exceed 300 ADC at the applied voltage.
Is 3216FF30-R AEC-Q200 qualified?
No qualification should be inferred for this rating; Eaton limits the stated AEC-Q200 range to 250 mA through 7 A.
Can it run continuously at 30 A?
Designing at or below about 80% of rated current is recommended, followed by temperature and waveform validation.
Is this a high-inrush fuse?
It is a fast-acting fuse. If the load has significant inrush, compare the pulse energy and time-current profile with the curves rather than selecting by current rating alone.
Packaging: TR prefix, 3,000 fuses on 8 mm tape-and-reel, 7-inch (178 mm) reel, EIA-481.
Ordering reference: specify the packaging code with the product code, for example TR/3216FF30-R. Confirm the exact orderable code and stock status before purchase.
Design note: Electrical values are typical unless identified as ratings. Verify the latest Eaton datasheet and design curves before final release.

Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd