5CLE-100E Eaton Bussmann 5.5kV 100A Medium Voltage Fuse
5CLE-100E Eaton Bussmann 5.5kV 100A Medium Voltage Fuse

5CLE-100E Eaton Bussmann 5.5kV 100A Medium Voltage Fuse

Share
pEaton Bussmann 5CLE-100E, 5.5kV 100A medium voltage fuse, 63 kAIC interrupting. For transformer, feeder and switchgear protection./p
    • Product Details
    • Download

    5CLE-100E Eaton Bussmann 5.5kV 100A Medium Voltage Fuse

    At a Glance
    • 5.5 kV rated voltage, 100 A rated current
    • 63 kAIC interrupting rating

    The Eaton Bussmann 5CLE-100E is a medium voltage fuse with 5.5 kV rated voltage, 100 A rated current, 63 kAIC interrupting capacity.

    Specifications

    General specifications
    UPC051712528504
    Product Length/Depth17.9 in
    Product Height3 in
    Product Width3 in
    Product Weight10 lb
    Electrical rating
    Amperage Rating100 A
    Interrupt rating63 kAIC
    General information
    Special featuresSingle barrel, Indoor/outdoor

    Standards Reference

    • ANSI C37.46

    Series Selection Table

    5CLE-100E series selection table
    Ampere ratings, dimensions and catalog numbers across the Medium Voltage Fuse family, reproduced from the Eaton Bussmann datasheet.

    Applications

    • Energy and utility distribution
    • Industrial equipment
    • Transformer protection

    Selection Notes

    • Select against the available fault current at the installation point, not the load current — the interrupting rating has to exceed it with margin.
    • E-rated fuses follow a defined melting curve; pairing them with non-E-rated devices in the same feeder breaks coordination.

    Common Questions

    What are the ratings of the Eaton Bussmann 5CLE-100E?
    5.5 kV / 100 A, with a 63 kAIC interrupting rating.
    How much fault current can the 5CLE-100E interrupt?
    63 kAIC. The available fault current at the installation point must not exceed this value.
    Which standards does the 5CLE-100E comply with?
    It is referenced against ANSI C37.46 in the manufacturer data.
    How should I select the 5CLE-100E for a circuit?
    Match the voltage rating to the system voltage, keep the continuous current above the load current, and check that the interrupting rating exceeds the available fault current. In medium voltage work, select on the transformer or feeder fault level rather than the load current alone.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message