Chipanalog CA-IF1030S Interface IC

Chipanalog CA-IF1030S

This CAN transceiver series complies with the ISO 11898-2 (2016) CAN (Controller Area Network) physical layer standard and can be directly connected to 3.3V other controllers with CAN control protocol for use. The CA-IF1030S and CA-IF1034S devices have a silent mode, in which the transmitter is turned off and the receiver continues to operate; The CA-IF1033S/ZS device has low power standby mode and remote wake-up request characteristics. The CA-IF1033S/ZS and CA-IF1034S devices have a shutdown mode, where the device Icc current is below 1 μ A.

Features

• 3.3V single power supply
• Meets the ISO 11898-2:2016 and ISO 11898-5:2007 physical layer standards
• Ideal passive behavior when unpowered
• Bus and logic terminals are high impedance (no
• load)
• Power up/down with glitch free operation on bus and RXD output
• Integrated protection increases robustness
• ±18V fault-tolerant CANH and CANL
• ±12V extended common-mode input range (CMR)
• Undervoltage protection on VCC
• Transmitter dominant timeout prevents lockup, data rates down to 6.25 kbps
• Thermal shutdown
• Maximum standby current ICC
• 15μA
• Maximum shutdown current ICC
• 1μA
• –55°C to 150°C Junction Temperatures Range
• –40°C to 125°C Operation Temperatures Range
• Available in SOIC8 and SOT23-8(CA-IF1033ZS) Packages
• Bus pin ESD Protection Exceeds 25kV HBM

Applications

• Industrial control
• HVAC
• Building/Temperature Control Automation

Device Information

Download Datasheet (PDF)