Eaton AMLV08V31C250 Multilayer Varistor, 67 V Clamp
Eaton AMLV08V31C250 Multilayer Varistor, 67 V Clamp

Eaton AMLV08V31C250 Multilayer Varistor, 67 V Clamp

Share
AMLV08V31C250: multilayer varistor ESD suppressor, 35.1-42.9 V varistor voltage, 31 V working, 67 V clamp, 250 pF, 0.3 J.
    • Product Details
    • Download

    Eaton AMLV08V31C250 Multilayer Varistor, 67 V Clamp

    AMLV08V31C250 at a glance: multilayer varistor ESD suppressor, 35.1-42.9 V varistor voltage, 31 V working, 67 V clamp, 250 pF, 0.3 J.

    Specification Table

    ParameterValue
    Orderable part numberAMLV08V31C250
    Working voltage, DC31 Vdc
    Working voltage, AC25 Vac
    Varistor voltage at 1 mA35.1 V to 42.9 V
    Clamping voltage at 1 A67 V
    Energy absorption, 10/1000 us0.3 J
    Peak current, 8/20 us80 A
    Typical capacitance at 1 MHz250 pF
    Vjump (5 min)29 V
    WLD (10 pulses)0.5 J
    Leakage current at working voltagemax. 20 uA
    Package0805 (2012 metric)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1078

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    Reading the Data Sheet

    A chip varistor is a ceramic body with two metal terminations, so it looks like a capacitor and behaves like one until the transient arrives. That is why the capacitance column is quoted on every page: it is the parameter that decides whether the part can sit on a data line.

    The clamp column works out at 1.72 times the varistor voltage: 67 V at the rated current against 39 V at 1 mA. That ratio is what the downstream part has to survive, not the 39 V figure on the label.

    Standing at 31 V the leakage is at most 20 uA, which is 0.62 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    The 250 pF typical capacitance is the cost of the clamp. On a power rail it is irrelevant; on a data line it is the reason to look at the low-capacitance versions of the same voltage.

    Within the AMLV family this is item 12 of 28 in the Eaton catalogue.

    Where This Series Fits

    The return path is half the component. A varistor tied to a ground plane far from the connector leaves the loop inductance in series with the clamp, and the residual voltage at the chip is the clamp plus L di/dt.

    • The energy rating assumes a single pulse. Repeating the same transient heats the body faster than the datasheet curve suggests, because the curve is drawn for one event at a time.
    • These parts are halogen free and RoHS compliant without exemptions, which matters for automotive and appliance programmes.

    Frequently Asked Questions

    Can it protect a differential pair?
    Only with a low-capacitance part and a layout that keeps both lines symmetric. A single varistor from each line to ground is normal; one across the pair is not, because it unbalances the pair.

    What happens if the part is run above its working voltage?
    Leakage rises steeply and the body heats. A varistor is not a clamp with a sharp knee, so continuous operation above the rating is a slow degradation, not an immediate failure.

    Does the package size change the electrical ratings?
    Yes, the energy and peak current scale with the body volume, so a 0402 and a 1206 of the same voltage are not interchangeable on a surge.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products