Eaton AMLV13V26C1500 1210 Chip Varistor 26 Vdc
Eaton AMLV13V26C1500 1210 Chip Varistor 26 Vdc

Eaton AMLV13V26C1500 1210 Chip Varistor 26 Vdc

Share
AMLV13V26C1500: multilayer varistor ESD suppressor, 29.7-36.3 V varistor voltage, 26 V working, 54 V clamp, 1500 pF, 1.9 J.
    • Product Details
    • Download

    Eaton AMLV13V26C1500 1210 Chip Varistor 26 Vdc

    AMLV13V26C1500 at a glance: multilayer varistor ESD suppressor, 29.7-36.3 V varistor voltage, 26 V working, 54 V clamp, 1500 pF, 1.9 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberAMLV13V26C1500
    Working voltage, DC26 Vdc
    Working voltage, AC20 Vac
    Varistor voltage at 1 mA29.7 V to 36.3 V
    Clamping voltage at 1 A54 V
    Energy absorption, 10/1000 us1.9 J
    Peak current, 8/20 us400 A
    Typical capacitance at 1 MHz1500 pF
    Vjump (5 min)27 V
    WLD (10 pulses)3 J
    Leakage current at working voltagemax. 20 uA
    Package1210 (3225 metric)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1078

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    Reading the Data Sheet

    A chip varistor is a ceramic body with two metal terminations, so it looks like a capacitor and behaves like one until the transient arrives. That is why the capacitance column is quoted on every page: it is the parameter that decides whether the part can sit on a data line.

    The clamp column works out at 1.64 times the varistor voltage: 54 V at the rated current against 33 V at 1 mA. That ratio is what the downstream part has to survive, not the 33 V figure on the label.

    Standing at 26 V the leakage is at most 20 uA, which is 0.52 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    The 1500 pF typical capacitance is the cost of the clamp. On a power rail it is irrelevant; on a data line it is the reason to look at the low-capacitance versions of the same voltage.

    Within the AMLV family this is item 19 of 28 in the Eaton catalogue.

    What This Family Is For

    The return path is half the component. A varistor tied to a ground plane far from the connector leaves the loop inductance in series with the clamp, and the residual voltage at the chip is the clamp plus L di/dt.

    • A varistor is not a zener. It has no sharp knee, so it conducts a little at the working voltage and the leakage column is the honest measure of that.
    • The varistor voltage tolerance is wide by design. Two parts of the same part number can differ by 20 percent and both be good, so the design has to work at the low end of the range.

    Frequently Asked Questions

    Can it protect a differential pair?
    Only with a low-capacitance part and a layout that keeps both lines symmetric. A single varistor from each line to ground is normal; one across the pair is not, because it unbalances the pair.

    What happens if the part is run above its working voltage?
    Leakage rises steeply and the body heats. A varistor is not a clamp with a sharp knee, so continuous operation above the rating is a slow degradation, not an immediate failure.

    Does the package size change the electrical ratings?
    Yes, the energy and peak current scale with the body volume, so a 0402 and a 1206 of the same voltage are not interchangeable on a surge.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products