Welcome to our company!
FWH-275A Eaton Bussmann 500V 275A Semiconductor Fuse
Share
Eaton Bussmann FWH-275A — 500V 275A semiconductor fuse, 50 kAIC at 500 Vdc 200 kAIC at 1000 Vac interrupting. Protects semiconductors in drives, rectifiers and inverters.
- Product Details
- Download
FWH-275A Eaton Bussmann 500V 275A Semiconductor Fuse
At a Glance
- 1000 Vac, 800 Vdc rated voltage, 275A RMS rated current
- 50 kAIC at 500 Vdc 200 kAIC at 1000 Vac interrupting rating
- Blade end x blade end terminations
- Non Indicating
The Eaton Bussmann FWH-275A is a fuse with 1000 Vac, 800 Vdc rated voltage, 275A RMS rated current, 50 kAIC at 500 Vdc 200 kAIC at 1000 Vac interrupting capacity. Construction is non indicating.
Specifications
General specifications
| UPC | 051712153775 |
| EAN | 5027590061247 |
| Product Length/Depth | 1.69 in |
| Product Height | 1.61 in |
| Product Width | 4.52 in |
| Product Weight | 0.52 lb |
Electrical rating
| Amperage Rating | 275A RMS |
| Interrupt rating | 50 kAIC at 500 Vdc 200 kAIC at 1000 Vac |
| Voltage rating | 1000 Vac, 800 Vdc |
| Watt losses | 46 W |
Physical details
| Packaging type | Standard |
General information
| Connection | Blade end x blade end |
| Fuse indicator | Non Indicating |
| Mounting method | Stud |
Series Selection Table
Applications
- Industrial equipment
Selection Notes
- Termination: Blade end x blade end. Confirm the mating clip or busbar before ordering; ferrule and blade ends are not interchangeable.
Common Questions
What are the ratings of the Eaton Bussmann FWH-275A?
1000 Vac, 800 Vdc / 275A RMS, with a 50 kAIC at 500 Vdc 200 kAIC at 1000 Vac interrupting rating.
How much fault current can the FWH-275A interrupt?
50 kAIC at 500 Vdc 200 kAIC at 1000 Vac. The available fault current at the installation point must not exceed this value.
How does the FWH-275A connect?
Blade end x blade end. Confirm the mating clip, holder or busbar before ordering — ferrule and blade ends are not interchangeable.
How should I select the FWH-275A for a circuit?
Match the voltage rating to the system voltage, keep the continuous current above the load current, and check that the interrupting rating exceeds the available fault current. In medium voltage work, select on the transformer or feeder fault level rather than the load current alone.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
