
| Parameter | Value |
|---|---|
| Orderable part number | CL1110-6-100TR-R |
| Number of phases | 6 |
| Rated inductance per phase | 100 nH ±20% |
| Open circuit inductance (OCL) | 470 nH / 450 nH (per pin pair) |
| Full load inductance (FLL) | 340 nH minimum |
| DC resistance (DCR) | 0.63 mOhm |
| Rated current per phase | 15 A |
| Package | CL1110 footprint (see drawing) |
| Packaging | TR - tape and reel |
| RoHS | Compliant (-R suffix) |
The 15 A per phase rating is set by the winding and the core, not by the load. Design the converter so every phase shares the current evenly; an unbalanced phase reaches its limit long before the average current does.
DCR 0.63 mOhm is why the 6-phase version exists. Halving the current per phase by doubling the phase count cuts the loss per phase by four, and the total inductor loss with it.
CL1110 是 100 nH 的多相电感,2 / 4 / 6 相,OCL 到 470 nH。
OCL is the open-circuit inductance: 470 nH / 450 nH (per pin pair) measured with no DC bias. In the circuit the core is biased by the phase current and the inductance falls - the datasheet gives FLL as the value at rated current, and that is the number to use for ripple calculation. 6 phases is a high-current configuration. Per-phase current is low enough that copper loss stays small even with 15 A in each winding, which is the whole point of going to this many phases.
Can I use fewer phases than the part number?
No. The part number fixes the phase count and the pinout that goes with it.
Is this part RoHS compliant?
Yes - the -R suffix on the part number denotes the RoHS build.
What is Isat?
The current at which the inductance starts to fall away. It is a magnetic limit, not a thermal one, and it is the point at which ripple control starts to go.
Design note: use the full-load inductance and the hot-case
DCR for the loss budget, and check the layout keeps each phase current loop closed.

Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd