
| Parameter | Value |
|---|---|
| Orderable part number | CMS2-4-R |
| I rms (max) | 2.8 A |
| Open circuit inductance (OCL) | 102 uH minimum, (1-2) & (4-3) |
| DCR typical @ 20 °C (1-2) | 0.019 ohm |
| DCR typical @ 20 °C (4-3) | 0.019 ohm |
| Leakage inductance typ | 0.8 uH |
| Interwinding capacitance typ | 2.8 pF |
| Package | CMS series, surface mount |
| Operating temperature | 160 °C maximum |
| RoHS | Compliant (-R suffix) |
The impedance figure is measured across the winding pair, which is exactly the common-mode path. That is why these parts are picked by impedance at the noise frequency rather than by inductance.
For a DC-DC output filter this is the part that decides whether the noise stays inside the conducted limits, and how much margin the design keeps at the top of the load step. 102 uH is the working middle of the CMS range: enough inductance to hold down the ripple on a rail, small enough that the 2.8 A Irms rating is not the thing limiting the design.
CMS 是贴片共模电感,CMS1 / CMS2 / CMS3 三个尺寸系列,4.5 uH 到 1310 uH。
The 102 uH of common-mode inductance is what blocks the noise; the 0.8 uH of leakage inductance is what gets past, and the 2.8 pF of interwinding capacitance is what couples across the windings at high frequency. CMS2 is the mid-size CMS footprint
What impedance should I pick?
The one that gives the attenuation you need at the noise frequency of your circuit, then check that the DCR is acceptable on the signal.
Does it affect my signal?
Only through DCR and the small amount of leakage inductance. The differential signal is not filtered by design.
Why are there two DCR values?
The CMS series specifies each winding separately, measured between (1-2) and between (4-3).
Design note: pick the choke by impedance at the noise
frequency, then confirm DCR and rated current against the signal or the rail.

Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd