Eaton CMS3-8-R Common-Mode Noise Suppressor, 350 uH
Eaton CMS3-8-R Common-Mode Noise Suppressor, 350 uH

Eaton CMS3-8-R Common-Mode Noise Suppressor, 350 uH

Share
Eaton CMS3-8-R: 350 uH common-mode inductor, 2 A Irms, 0.04 ohm DCR, surface mount.
    • Product Details
    • Download

    Eaton CMS3-8-R Common-Mode Noise Suppressor, 350 uH

    CMS3-8-R: common-mode choke, OCL 350 uH minimum, 2 A Irms, leakage 3 uH.

    Electrical Specifications

    ParameterValue
    Orderable part numberCMS3-8-R
    I rms (max)2 A
    Open circuit inductance (OCL)350 uH minimum, (1-2) & (4-3)
    DCR typical @ 20 °C (1-2)0.04 ohm
    DCR typical @ 20 °C (4-3)0.04 ohm
    Leakage inductance typ3 uH
    Interwinding capacitance typ4.4 pF
    PackageCMS series, surface mount
    Operating temperature160 °C maximum
    RoHSCompliant (-R suffix)

    What the Numbers Mean

    Differential mode is not affected in theory, but DCR is real: every milliohm is a voltage drop and a bit of heat in the signal path, and on a low-voltage rail that matters.

    Impedance rolls off with frequency and with bias, so the value on the data sheet is a starting point rather than a guarantee. Model the network, then measure. 350 uH is a high-inductance part with a correspondingly low 2 A Irms. The trade is deliberate - you give up current capability to get attenuation down low in the band where the noise actually lives.

    Where This Series Fits

    CMS 是贴片共模电感,CMS1 / CMS2 / CMS3 三个尺寸系列,4.5 uH 到 1310 uH。

    • Typical use: 开关电源输出滤波、DC-DC 共模抑制、EMI 整改.
    • CMS 的 OCL 是在 (1-2) 与 (4-3) 两组绕组上测的最小值,实际应用中两根线都要接对绕组。
    • Data sheet 4313.

    The 350 uH of common-mode inductance is what blocks the noise; the 3 uH of leakage inductance is what gets past, and the 4.4 pF of interwinding capacitance is what couples across the windings at high frequency. CMS3 is the largest CMS footprint, with the lowest DCR of the three

    Frequently Asked Questions

    Is this part RoHS compliant?
    Yes - the -R suffix denotes the RoHS build.

    Is this part RoHS compliant?
    Yes - the -R suffix denotes the RoHS build.

    Is this part RoHS compliant?
    Yes - the -R suffix denotes the RoHS build.

    Design note: pick the choke by impedance at the noise
    frequency, then confirm DCR and rated current against the signal or the rail.

    Mechanical Dimensions

    eaton-cms-common-mode-inductors-surface-mount-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products