
| Parameter | Value |
|---|---|
| Orderable part number | CTX1000-1-52-R |
| Horizontal mount version | CTX1000-1-52LPR |
| Header mount version | CTX1000-1-52M-R |
| Inductance | 1004.0 uH ±20% |
| DCR maximum @ +25 °C | 638 mOhm |
| Idc | 1.5 A |
| Isat | 2.1 A |
| Volt-time rating | 132 V-us |
| Energy at Isat | 1530 uJ |
| Mounting | Through-hole |
| Operating temperature | -40 °C to +105 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 4304 |

Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
This is a toroid power inductor with the winding on a closed ring core. Its useful numbers are the DC current, the saturation current, and the energy stored at saturation, which together describe how much transient the part can support.
At 1.5 A the winding dissipates about 1.44 W in copper, using the 638 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.
Saturation is reached at 2.1 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.
The core stores about 1530 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.
The volt-time rating is 132 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.
Within the CTX1000 family this is value 1 of 1, in a range that runs from 1004 to 1004 uH.
The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.
Why do toroids radiate less?
The magnetic path is closed inside the ring, so almost no flux escapes. That is why a toroid can sit next to sensitive circuitry without a shield.
Why are there three part numbers per row?
Vertical, horizontal and header-mounted versions of the same core and winding. The electrical values are identical; only the mounting differs.
Why do toroids radiate less?
The magnetic path is closed inside the ring, so almost no flux escapes. That is why a toroid can sit next to sensitive circuitry without a shield.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd