
| Parameter | Value |
|---|---|
| Orderable part number | CTX150-3P-R |
| Inductance, parallel | 150 uH |
| Inductance, series | 599 uH |
| DC current, parallel | 0.64 A |
| DC current, series | 0.32 A |
| DCR, parallel maximum | 621 mOhm |
| DCR, series maximum | 2.48 Ohm |
| Package | See dimension drawing in the data sheet |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data DS4314 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data DS4314; the package line above gives the body size where
the data sheet states it.
The ECONO-PAC and OCTA-PAC families are the same construction in different core grades: a toroid with two identical windings brought out to four pads, so one part covers two inductance ranges.
Parallel gives 150 uH at 0.64 A; series gives 599 uH at 0.32 A. The inductance ratio is about 4 to 1, which is the turns-squared rule at work.
Within the CTX150 family this is item 3 of 4 in the Eaton catalogue.
The ECONO-PAC and OCTA-PAC ranges run from under 1 uH in parallel to several millihenry in series, all two-winding toroids on powder cores.
What is the volt-second rating?
The flux swing the core can take per switching cycle before saturation. At a given switching frequency it converts directly to the maximum applied voltage.
Can it be used as a transformer?
Yes, the two windings are on the same core, so it is a 1:1 transformer when used that way. The isolation between windings is not a safety barrier; check the construction note before using it across a mains barrier.
What is the volt-second rating?
The flux swing the core can take per switching cycle before saturation. At a given switching frequency it converts directly to the maximum applied voltage.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd