Eaton CTX150-5-52-R 150.6 uH Toroid Inductor 66 V-us
Eaton CTX150-5-52-R 150.6 uH Toroid Inductor 66 V-us

Eaton CTX150-5-52-R 150.6 uH Toroid Inductor 66 V-us

Share
CTX150-5-52-R: toroid power inductor, 150.6 uH, 7.7 A, Isat 7.5 A, DCR 40.1 mOhm.
    • Product Details
    • Download

    Eaton CTX150-5-52-R 150.6 uH Toroid Inductor 66 V-us

    CTX150-5-52-R at a glance: toroid power inductor, 150.6 uH, 7.7 A, Isat 7.5 A, DCR 40.1 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberCTX150-5-52-R
    Horizontal mount versionCTX150-5-52LP-R
    Header mount versionCTX150-5-52M-R
    Inductance150.6 uH ±20%
    DCR maximum @ +25 °C40.1 mOhm
    Idc7.7 A
    Isat7.5 A
    Volt-time rating66 V-us
    Energy at Isat2960 uJ
    MountingThrough-hole
    Operating temperature-40 °C to +105 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4304

    Mechanical Drawing

    CTX150-5-52-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    A toroid concentrates the magnetic path in a closed ring, so almost all of the flux stays inside the core. That is why toroids radiate little and why they are used where a filter inductor has to sit next to sensitive circuitry without a shield.

    At 7.7 A the winding dissipates about 2.38 W in copper, using the 40.1 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 7.5 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    The core stores about 2960 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.

    The volt-time rating is 66 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.

    Within the CTX150 family this is value 3 of 4, in a range that runs from 12.8 to 152 uH.

    Series Positioning

    The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.

    • The winding is exposed; check the insulation against the working voltage before mounting the part against a chassis.
    • Typical applications: filters; buck and boost switches; chokes.
    • Design note: the three mounting variants share one electrical row, so a mechanical change does not require requalifying the magnetics.

    Frequently Asked Questions

    What does the energy column mean?
    The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.

    What does the energy column mean?
    The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.

    Why are there three part numbers per row?
    Vertical, horizontal and header-mounted versions of the same core and winding. The electrical values are identical; only the mounting differs.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products