Eaton CTX20-1-52-R 20.22 uH Toroid Power Choke
Eaton CTX20-1-52-R 20.22 uH Toroid Power Choke

Eaton CTX20-1-52-R 20.22 uH Toroid Power Choke

Share
CTX20-1-52-R: toroid power inductor, 20.22 uH, 1.8 A, Isat 2.2 A, DCR 82.9 mOhm.
    • Product Details
    • Download

    Eaton CTX20-1-52-R 20.22 uH Toroid Power Choke

    CTX20-1-52-R at a glance: toroid power inductor, 20.22 uH, 1.8 A, Isat 2.2 A, DCR 82.9 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberCTX20-1-52-R
    Horizontal mount versionCTX20-1-52LP-R
    Header mount versionCTX20-1-52M-R
    Inductance20.22 uH ±20%
    DCR maximum @ +25 °C82.9 mOhm
    Idc1.8 A
    Isat2.2 A
    Volt-time rating7.8 V-us
    Energy at Isat36 uJ
    MountingThrough-hole
    Operating temperature-40 °C to +105 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 4304

    Mechanical Drawing

    CTX20-1-52-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 4304: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a toroid power inductor with the winding on a closed ring core. Its useful numbers are the DC current, the saturation current, and the energy stored at saturation, which together describe how much transient the part can support.

    At 1.8 A the winding dissipates about 0.269 W in copper, using the 82.9 mOhm figure. That is the DC floor of the loss budget: ripple and core loss come on top of it.

    Saturation is reached at 2.2 A. Beyond that point the inductance falls on the soft part of the curve, and the converter’s ripple grows faster than the load current does.

    The core stores about 36 µJ at saturation, which is the energy available to bridge a load step before the control loop reacts.

    The volt-time rating is 7.8 V-us: the applied volt-second product that produces a defined core loss. Exceed it and the core heats faster than the copper loss alone would suggest.

    Within the CTX20 family this is value 3 of 6, in a range that runs from 16 to 31.5 uH.

    Series Positioning

    The toroid family covers microhenry to tens of microhenry at currents up to a few amps, in vertical, horizontal and header-mounted versions of the same core.

    • The winding is exposed; check the insulation against the working voltage before mounting the part against a chassis.
    • Typical applications: filters; buck and boost switches; chokes.
    • Design note: the three mounting variants share one electrical row, so a mechanical change does not require requalifying the magnetics.

    Frequently Asked Questions

    Why do toroids radiate less?
    The magnetic path is closed inside the ring, so almost no flux escapes. That is why a toroid can sit next to sensitive circuitry without a shield.

    What does the energy column mean?
    The energy stored at saturation current, in microjoules. It is the figure that connects inductance and current into a single transient capability.

    Why are there three part numbers per row?
    Vertical, horizontal and header-mounted versions of the same core and winding. The electrical values are identical; only the mounting differs.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products