Eaton CTX20-4P-R Toroid Transformer / Inductor
Eaton CTX20-4P-R Toroid Transformer / Inductor

Eaton CTX20-4P-R Toroid Transformer / Inductor

Share
CTX20-4P-R: toroid power inductor, 20.6 uH.
    • Product Details
    • Download

    Eaton CTX20-4P-R Toroid Transformer / Inductor

    CTX20-4P-R at a glance: toroid power inductor, 20.6 uH.

    Specification Table

    ParameterValue
    Orderable part numberCTX20-4P-R
    Inductance, parallel20.6 uH
    Inductance, series82.5 uH
    DC current, parallel1.9 A
    DC current, series0.95 A
    DCR, parallel maximum84 mOhm
    DCR, series maximum337 mOhm
    PackageSee dimension drawing in the data sheet
    MountingSurface mount
    Operating temperature-40 C to +125 C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data DS4314

    Outline drawing, winding arrangement and recommended pad layout are on
    page 2 of Eaton Technical Data DS4314; the package line above gives the body size where
    the data sheet states it.

    The Figures Explained

    A toroid has no air gap in the usual sense: the gap is distributed through the powder core, which is why the saturation curve is soft and why these parts hold inductance further into the current range than a gapped ferrite.

    Parallel gives 20.6 uH at 1.9 A; series gives 82.5 uH at 0.95 A. The inductance ratio is about 4 to 1, which is the turns-squared rule at work.

    Within the CTX20 family this is item 4 of 4 in the Eaton catalogue.

    What This Family Is For

    The ECONO-PAC and OCTA-PAC ranges run from under 1 uH in parallel to several millihenry in series, all two-winding toroids on powder cores.

    • The windings are not a safety isolation barrier. Do not use the part across a mains barrier without checking the construction.
    • Typical applications: computer and portable power devices; lcd panels, dvd players; inductor: dc-dc converters; buck, boost, forward, and resonant converters; noise filtering and filter chokes.
    • Design note: parallel and series are two different parts in one body. Fill in the connection on the drawing before release.

    Frequently Asked Questions

    Why four times the inductance and not twice?
    Inductance scales with the square of the turns. Two identical windings in series double the turns, so the inductance goes up by four while the current rating halves because the wire is now shared in one path.

    Can it be used as a transformer?
    Yes, the two windings are on the same core, so it is a 1:1 transformer when used that way. The isolation between windings is not a safety barrier; check the construction note before using it across a mains barrier.

    Can it be used as a transformer?
    Yes, the two windings are on the same core, so it is a 1:1 transformer when used that way. The isolation between windings is not a safety barrier; check the construction note before using it across a mains barrier.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message