
| Parameter | Value |
|---|---|
| Orderable part number | CTX200-2P-R |
| Inductance, parallel | 202 uH |
| Inductance, series | 806 uH |
| DC current, parallel | 0.46 A |
| DC current, series | 0.23 A |
| DCR, parallel maximum | 951 mOhm |
| DCR, series maximum | 3.8 Ohm |
| Package | See dimension drawing in the data sheet |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data DS4314 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data DS4314; the package line above gives the body size where
the data sheet states it.
The ECONO-PAC and OCTA-PAC families are the same construction in different core grades: a toroid with two identical windings brought out to four pads, so one part covers two inductance ranges.
Parallel gives 202 uH at 0.46 A; series gives 806 uH at 0.23 A. The inductance ratio is about 4 to 1, which is the turns-squared rule at work.
Within the CTX200 family this is item 2 of 4 in the Eaton catalogue.
The ECONO-PAC and OCTA-PAC ranges run from under 1 uH in parallel to several millihenry in series, all two-winding toroids on powder cores.
Can it be used as a transformer?
Yes, the two windings are on the same core, so it is a 1:1 transformer when used that way. The isolation between windings is not a safety barrier; check the construction note before using it across a mains barrier.
Parallel or series – which do I use?
Parallel for high current at low inductance, series for the opposite. The two windings are identical, so series connection quadruples the inductance and halves the current rating.
Parallel or series – which do I use?
Parallel for high current at low inductance, series for the opposite. The two windings are identical, so series connection quadruples the inductance and halves the current rating.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd