
| Parameter | Value |
|---|---|
| Orderable part number | CTX68-1P-R |
| Inductance, parallel | 68.4 uH |
| Inductance, series | 274 uH |
| DC current, parallel | 0.66 A |
| DC current, series | 0.33 A |
| DCR, parallel maximum | 373 mOhm |
| DCR, series maximum | 1.49 Ohm |
| Package | See dimension drawing in the data sheet |
| Mounting | Surface mount |
| Operating temperature | -40 C to +125 C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data DS4314 |
Outline drawing, winding arrangement and recommended pad layout are on
page 2 of Eaton Technical Data DS4314; the package line above gives the body size where
the data sheet states it.
A toroid has no air gap in the usual sense: the gap is distributed through the powder core, which is why the saturation curve is soft and why these parts hold inductance further into the current range than a gapped ferrite.
Parallel gives 68.4 uH at 0.66 A; series gives 274 uH at 0.33 A. The inductance ratio is about 4 to 1, which is the turns-squared rule at work.
Within the CTX68 family this is item 1 of 4 in the Eaton catalogue.
The ECONO-PAC and OCTA-PAC ranges run from under 1 uH in parallel to several millihenry in series, all two-winding toroids on powder cores.
Why four times the inductance and not twice?
Inductance scales with the square of the turns. Two identical windings in series double the turns, so the inductance goes up by four while the current rating halves because the wire is now shared in one path.
Why four times the inductance and not twice?
Inductance scales with the square of the turns. Two identical windings in series double the turns, so the inductance goes up by four while the current rating halves because the wire is now shared in one path.
What is the volt-second rating?
The flux swing the core can take per switching cycle before saturation. At a given switching frequency it converts directly to the maximum applied voltage.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd