Eaton DR125-220-R 4.71 A Saturation Shielded Inductor 22 uH
Eaton DR125-220-R 4.71 A Saturation Shielded Inductor 22 uH

Eaton DR125-220-R 4.71 A Saturation Shielded Inductor 22 uH

Share
Eaton DR125-220-R: Shielded Drum Core Power Inductor, 22 uH, 3.7 A, DCR 39.6 mOhm.
    • Product Details
    • Download

    Eaton DR125-220-R 4.71 A Saturation Shielded Inductor 22 uH

    DR125-220-R at a glance: shielded drum core inductor, 22 uH, 3.7 A Irms, 4.71 A Isat, DCR 39.6 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberDR125-220-R
    Rated inductance22 uH ±20%
    Open circuit inductance (OCL)22.4 uH
    Irms (40 °C rise)3.7 A
    Isat4.71 A
    DCR typical @ 20 °C39.6 mOhm
    Volt-microsecond rating22.2 V-us
    Package12.5 x 12.5 mm footprint, 6.0 mm max height
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant (-R suffix)

    How to Read These Ratings

    This is a surface-mount drum core with a ferrite shield. The winding sits in a pot core so the flux path closes through ferrite rather than through air, which raises the inductance for a given winding and keeps the radiated field small enough to sit next to a sensitive node.

    At 39.6 mOhm this is a part where the winding, not the core, decides the temperature rise. The data sheet quotes the typical and the maximum separately for a reason: build your budget on the maximum.

    Saturation degrades with temperature on ferrite. Isat is the peak current for approximately 30% rolloff at +20 °C, and the hot value is the one that matters under a hood or inside a sealed enclosure.

    What This Family Is For

    DR125 is the 6.0 mm member of the 12.5 mm family, with current up to 45 A peak. The larger body spreads the winding over more copper, which is where the current headroom comes from.

    • Typical applications: Desktop and servers, DC-DC converters, LCD panels, portable and handheld devices, noise filtering and filter chokes.
    • Peak current and RMS current are different limits on this series; the ripple current adds heating without adding output, so design to Irms for temperature and Isat for headroom.
    • Data sheet 4315.

    Design Notes

    Choose 22 uH when the ripple target is in the middle of the design window: the DCR stays at 39.6 mOhm and the saturation limit at 4.71 A leaves the transient room it needs.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    Is the "-R" suffix important?
    Yes - it denotes the RoHS-compliant build. The same inductance without it is a different ordering code.

    What is the difference between OCL and rated inductance?
    OCL is measured at zero DC bias. The rated inductance is the value the part still has at its rated current, and that is what the ripple calculation needs.

    How is it mounted?
    Surface mount, reflow compatible and J-STD-020 compliant. The pad layout on the data sheet is the one the ratings were measured on.

    Design note: use the maximum DCR for the loss budget, keep the peak current below Isat with margin for the transient, and remember the 40 °C rise assumes free air on the recommended pad.

    Mechanical Dimensions

    eaton-dr-high-power-density-high-efficiency-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products