Eaton DR74-471-R Shielded Drum Core, 470 uH uH 1740 mOhm
Eaton DR74-471-R Shielded Drum Core, 470 uH uH 1740 mOhm

Eaton DR74-471-R Shielded Drum Core, 470 uH uH 1740 mOhm

Share
Eaton DR74-471-R: Shielded Drum Core Power Inductor, 470 uH, 0.4 A, DCR 1.74 ohm.
    • Product Details
    • Download

    Eaton DR74-471-R Shielded Drum Core, 470 uH uH 1740 mOhm

    DR74-471-R at a glance: shielded drum core inductor, 470 uH, 0.4 A Irms, 0.46 A Isat, DCR 1740 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberDR74-471-R
    Rated inductance470 uH ±20%
    Open circuit inductance (OCL)465 uH
    Irms (40 °C rise)0.4 A
    Isat0.46 A
    DCR typical @ 20 °C1740 mOhm
    Volt-microsecond rating68.1 V-us
    Package7.6 x 7.6 mm footprint, 4.35 mm max height
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant (-R suffix)

    What the Numbers Mean

    A drum core inductor is a coil wound on a bobbin inside a ferrite pot, and the pot is what makes it usable on a switching board: the field stays inside the core instead of spraying across the PCB. That shielding is the difference between a rail that passes emissions and one that needs another filter stage.

    DCR 1740 mOhm is the conduction loss: at the rated current it dissipates about 0.28 W, and that heat has to leave through the terminals and the board.

    Isat is a magnetic limit, not a thermal one. Isat is the peak current for approximately 30% rolloff at +20 °C. Past it the inductance falls and the ripple climbs, and the current keeps flowing - nothing protects the switch except your own design margin.

    Positioning in the Range

    DR74 uses the same 7.6 x 7.6 mm pad as DR73 but stands 4.35 mm tall instead of 3.55 mm. The extra height is what allows the higher current ratings in this size class without changing the land pattern.

    • Typical applications: Desktop and servers, DVD and media players, portable devices, LCD panels, DC-DC converters, buck and boost stages.
    • Because the footprint matches DR73, a current upgrade can be a straight swap - verify the clearance above the part before you commit to the taller body.
    • Data sheet 4315.

    Design Notes

    Choose 470 uH when the ripple target is in the middle of the design window: the DCR stays at 1740 mOhm and the saturation limit at 0.46 A leaves the transient room it needs.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    Is the "-R" suffix important?
    Yes - it denotes the RoHS-compliant build. The same inductance without it is a different ordering code.

    How is it mounted?
    Surface mount, reflow compatible and J-STD-020 compliant. The pad layout on the data sheet is the one the ratings were measured on.

    Is Isat a thermal limit?
    No. Isat is where the core starts to saturate and the inductance falls by the stated percentage. Temperature is governed by Irms and the board, separately.

    Design note: use the maximum DCR for the loss budget, keep the peak current below Isat with margin for the transient, and remember the 40 °C rise assumes free air on the recommended pad.

    Mechanical Dimensions

    eaton-dr-high-power-density-high-efficiency-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products