Eaton DRA124-1R0-R Automotive Shielded Inductor 22 A
Eaton DRA124-1R0-R Automotive Shielded Inductor 22 A

Eaton DRA124-1R0-R Automotive Shielded Inductor 22 A

Share
Eaton DRA124-1R0-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 1 uH, 11.7 A, DCR 3.1 mOhm.
    • Product Details
    • Download

    Eaton DRA124-1R0-R Automotive Shielded Inductor 22 A

    DRA124-1R0-R at a glance: shielded drum core inductor, 1 uH, 11.7 A Irms, 22 A Isat, DCR 3.1 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberDRA124-1R0-R
    Rated inductance1 uH ±20%
    Open circuit inductance (OCL)0.82 uH
    Irms (40 °C rise)11.7 A
    Isat1 (30% rolloff @ +25 °C)22 A
    Isat2 (40% rolloff @ +125 °C)17.6 A
    DCR typical @ 20 °C3.1 mOhm
    DCR maximum @ 20 °C3.8 mOhm
    K-factor (Bp-p = K x L x dI)141
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    How to Read These Ratings

    AEC-Q200 is the entry ticket, not the destination. This part is qualified to the automotive standard and rated to 165 °C ambient plus self-heating, in a shielded drum core built to survive shock and vibration rather than a laboratory bench.

    At 165 °C the copper resistivity is about 60% higher than at 20 °C, so the DCR in the table is optimistic at the hot corner - budget the loss accordingly.

    Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C. In a buck converter the inductor current peaks at the top of the ripple, so the peak - not the average - is the number that has to stay below Isat with margin for the transient.

    Series Positioning

    DRA124 is the low-profile 12.5 mm AEC-Q200 part. It brings the current capability of the large size into a body that still fits under a module cover.

    • Typical applications: Automotive body electronics, LED lighting, ADAS, infotainment, DC-DC modules.
    • AEC-Q200 covers the qualification, not the application: the vibration and thermal profile of the actual mounting point still decides the service life.
    • Data sheet 4319.

    Sizing and Layout Notes

    At 1 uH this part is in the middle of the family. The winding that produces that inductance is also what sets the 3.1 mOhm DCR - more turns, thinner wire, more resistance.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    Why are there two Isat values?
    The first is the 30% roll-off point at +25 °C, the second is the 40% roll-off at +125 °C. Hot ferrite saturates earlier, so the second number is the one to use at temperature.

    How does it differ from the commercial DR part of the same size?
    The electrical shape is similar, the qualification, the temperature range and often the terminal construction are not. Do not assume drop-in equivalence.

    Why are there two Isat values?
    The first is the 30% roll-off point at +25 °C, the second is the 40% roll-off at +125 °C. Hot ferrite saturates earlier, so the second number is the one to use at temperature.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products