Eaton DRA124-3R3-R AEC-Q200 Shielded Inductor, 3.3 uH
Eaton DRA124-3R3-R AEC-Q200 Shielded Inductor, 3.3 uH

Eaton DRA124-3R3-R AEC-Q200 Shielded Inductor, 3.3 uH

Share
Eaton DRA124-3R3-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 3.3 uH, 6.94 A, DCR 9 mOhm.
    • Product Details
    • Download

    Eaton DRA124-3R3-R AEC-Q200 Shielded Inductor, 3.3 uH

    DRA124-3R3-R at a glance: shielded drum core inductor, 3.3 uH, 6.94 A Irms, 11.9 A Isat, DCR 9 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberDRA124-3R3-R
    Rated inductance3.3 uH ±20%
    Open circuit inductance (OCL)2.79 uH
    Irms (40 °C rise)6.94 A
    Isat1 (30% rolloff @ +25 °C)11.9 A
    Isat2 (40% rolloff @ +125 °C)9.48 A
    DCR typical @ 20 °C9 mOhm
    DCR maximum @ 20 °C11 mOhm
    K-factor (Bp-p = K x L x dI)75.7
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    What the Numbers Mean

    AEC-Q200 is the entry ticket, not the destination. This part is qualified to the automotive standard and rated to 165 °C ambient plus self-heating, in a shielded drum core built to survive shock and vibration rather than a laboratory bench.

    Thermal margin in a module is not the same as thermal margin on a bench. The ratings assume a mounting condition; the enclosure, the potting and the neighbouring components change it.

    Saturation degrades with temperature on ferrite. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C, and the hot value is the one that matters under a hood or inside a sealed enclosure.

    Where This Series Fits

    DRA124 is the low-profile 12.5 mm AEC-Q200 part. It brings the current capability of the large size into a body that still fits under a module cover.

    • Typical applications: Automotive body electronics, LED lighting, ADAS, infotainment, DC-DC modules.
    • AEC-Q200 covers the qualification, not the application: the vibration and thermal profile of the actual mounting point still decides the service life.
    • Data sheet 4319.

    Sizing and Layout Notes

    Choose 3.3 uH when the ripple target is in the middle of the design window: the DCR stays at 9 mOhm and the saturation limit at 11.9 A leaves the transient room it needs.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    What does AEC-Q200 cover?
    The qualification of the component itself: thermal shock, vibration, moisture, life and electrical stress. It does not qualify your assembly or your thermal design.

    Is the part shielded?
    Yes, magnetically shielded, which is what keeps the field out of the radios, sensors and ADAS front ends that share the module.

    What does AEC-Q200 cover?
    The qualification of the component itself: thermal shock, vibration, moisture, life and electrical stress. It does not qualify your assembly or your thermal design.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message