Eaton DRA124-8R2-R 8.2 uH AEC-Q200 Drum Core, 3.87 A
Eaton DRA124-8R2-R 8.2 uH AEC-Q200 Drum Core, 3.87 A

Eaton DRA124-8R2-R 8.2 uH AEC-Q200 Drum Core, 3.87 A

Share
Eaton DRA124-8R2-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 8.2 uH, 3.87 A, DCR 28 mOhm.
    • Product Details
    • Download

    Eaton DRA124-8R2-R 8.2 uH AEC-Q200 Drum Core, 3.87 A

    DRA124-8R2-R at a glance: shielded drum core inductor, 8.2 uH, 3.87 A Irms, 6.7 A Isat, DCR 28 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberDRA124-8R2-R
    Rated inductance8.2 uH ±20%
    Open circuit inductance (OCL)8.88 uH
    Irms (40 °C rise)3.87 A
    Isat1 (30% rolloff @ +25 °C)6.7 A
    Isat2 (40% rolloff @ +125 °C)5.36 A
    DCR typical @ 20 °C28 mOhm
    DCR maximum @ 20 °C34 mOhm
    K-factor (Bp-p = K x L x dI)42.8
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    What the Numbers Mean

    AEC-Q200 is the entry ticket, not the destination. This part is qualified to the automotive standard and rated to 165 °C ambient plus self-heating, in a shielded drum core built to survive shock and vibration rather than a laboratory bench.

    The 165 °C figure is ambient plus self-temperature rise, which means the part can be genuinely hot in service. Derate the current for the real ambient, not for a 25 °C bench, and check the solder joint as well as the winding.

    Saturation degrades with temperature on ferrite. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C, and the hot value is the one that matters under a hood or inside a sealed enclosure.

    Series Positioning

    DRA124 is the low-profile 12.5 mm AEC-Q200 part. It brings the current capability of the large size into a body that still fits under a module cover.

    • Typical applications: Automotive body electronics, LED lighting, ADAS, infotainment, DC-DC modules.
    • AEC-Q200 covers the qualification, not the application: the vibration and thermal profile of the actual mounting point still decides the service life.
    • Data sheet 4319.

    Design Notes

    At 8.2 uH this part is in the middle of the family. The winding that produces that inductance is also what sets the 28 mOhm DCR - more turns, thinner wire, more resistance.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    Is the part shielded?
    Yes, magnetically shielded, which is what keeps the field out of the radios, sensors and ADAS front ends that share the module.

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message