Eaton DRA125-3R3-R Automotive Shielded Inductor 12.8 A
Eaton DRA125-3R3-R Automotive Shielded Inductor 12.8 A

Eaton DRA125-3R3-R Automotive Shielded Inductor 12.8 A

Share
Eaton DRA125-3R3-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 3.3 uH, 8.63 A, DCR 7.3 mOhm.
    • Product Details
    • Download

    Eaton DRA125-3R3-R Automotive Shielded Inductor 12.8 A

    DRA125-3R3-R at a glance: shielded drum core inductor, 3.3 uH, 8.63 A Irms, 12.8 A Isat, DCR 7.3 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberDRA125-3R3-R
    Rated inductance3.3 uH ±20%
    Open circuit inductance (OCL)2.89 uH
    Irms (40 °C rise)8.63 A
    Isat1 (30% rolloff @ +25 °C)12.8 A
    Isat2 (40% rolloff @ +125 °C)10.2 A
    DCR typical @ 20 °C7.3 mOhm
    DCR maximum @ 20 °C8.7 mOhm
    K-factor (Bp-p = K x L x dI)68
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    The Figures Explained

    This is the automotive grade version of the drum core family: AEC-Q200 qualified, shielded, and rated to 165 °C including self-temperature rise. The electrical behaviour is familiar; the qualification and the mechanical build are not.

    At 165 °C the copper resistivity is about 60% higher than at 20 °C, so the DCR in the table is optimistic at the hot corner - budget the loss accordingly.

    Isat is a magnetic limit, not a thermal one. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C. Past it the inductance falls and the ripple climbs, and the current keeps flowing - nothing protects the switch except your own design margin.

    Series Positioning

    DRA125 is the 12.5 mm AEC-Q200 part at mid height - more current than DRA124, same footprint, so an upgrade does not force a board respin.

    • Typical applications: Automotive DC-DC converters, body control modules, LED lighting, ADAS, infotainment supplies.
    • Shielding matters in a module full of radios and sensors: the closed drum keeps the field in, but the layout still has to keep the hot loop small.
    • Data sheet 4319.

    Putting It to Work

    3.3 uH sits in the middle of the range, and the trade at that point is explicit: 7.3 mOhm of DCR against 12.8 A of saturation headroom.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    How does it differ from the commercial DR part of the same size?
    The electrical shape is similar, the qualification, the temperature range and often the terminal construction are not. Do not assume drop-in equivalence.

    Can I use it in a non-automotive design?
    Yes, and people do when they need the vibration and temperature headroom. You pay for the qualification you may not need.

    Why are there two Isat values?
    The first is the 30% roll-off point at +25 °C, the second is the 40% roll-off at +125 °C. Hot ferrite saturates earlier, so the second number is the one to use at temperature.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message