Eaton DRA125-470-R 47 uH AEC-Q200 Drum Core, 2.59 A
Eaton DRA125-470-R 47 uH AEC-Q200 Drum Core, 2.59 A

Eaton DRA125-470-R 47 uH AEC-Q200 Drum Core, 2.59 A

Share
Eaton DRA125-470-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 47 uH, 2.59 A, DCR 81 mOhm.
    • Product Details
    • Download

    Eaton DRA125-470-R 47 uH AEC-Q200 Drum Core, 2.59 A

    DRA125-470-R at a glance: shielded drum core inductor, 47 uH, 2.59 A Irms, 3.13 A Isat, DCR 81 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberDRA125-470-R
    Rated inductance47 uH ±20%
    Open circuit inductance (OCL)47.8 uH
    Irms (40 °C rise)2.59 A
    Isat1 (30% rolloff @ +25 °C)3.13 A
    Isat2 (40% rolloff @ +125 °C)2.51 A
    DCR typical @ 20 °C81 mOhm
    DCR maximum @ 20 °C97 mOhm
    K-factor (Bp-p = K x L x dI)16.7
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    What the Numbers Mean

    AEC-Q200 is the entry ticket, not the destination. This part is qualified to the automotive standard and rated to 165 °C ambient plus self-heating, in a shielded drum core built to survive shock and vibration rather than a laboratory bench.

    Thermal margin in a module is not the same as thermal margin on a bench. The ratings assume a mounting condition; the enclosure, the potting and the neighbouring components change it.

    The saturation current is measured at a defined roll-off, and Eaton states the percentage on the data sheet: Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C. Read the number with the percentage in hand, because "saturation" means different things at 25% and at 40%.

    Positioning in the Range

    DRA125 is the 12.5 mm AEC-Q200 part at mid height - more current than DRA124, same footprint, so an upgrade does not force a board respin.

    • Typical applications: Automotive DC-DC converters, body control modules, LED lighting, ADAS, infotainment supplies.
    • Shielding matters in a module full of radios and sensors: the closed drum keeps the field in, but the layout still has to keep the hot loop small.
    • Data sheet 4319.

    Design Notes

    47 uH is in the middle of what this series covers. Moving up in inductance costs DCR and saturation current; moving down buys both, at the price of ripple.

    The loss budget is the whole story with a power inductor: core loss grows with frequency and flux swing, copper loss grows with current, and the two meet at a different point for every inductance in the series.

    Frequently Asked Questions

    What does AEC-Q200 cover?
    The qualification of the component itself: thermal shock, vibration, moisture, life and electrical stress. It does not qualify your assembly or your thermal design.

    Is the part shielded?
    Yes, magnetically shielded, which is what keeps the field out of the radios, sensors and ADAS front ends that share the module.

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message