Eaton DRA125-820-R AEC-Q200 Shielded Inductor, 82 uH
Eaton DRA125-820-R AEC-Q200 Shielded Inductor, 82 uH

Eaton DRA125-820-R AEC-Q200 Shielded Inductor, 82 uH

Share
Eaton DRA125-820-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 82 uH, 2.01 A, DCR 135 mOhm.
    • Product Details
    • Download

    Eaton DRA125-820-R AEC-Q200 Shielded Inductor, 82 uH

    DRA125-820-R at a glance: shielded drum core inductor, 82 uH, 2.01 A Irms, 2.41 A Isat, DCR 135 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberDRA125-820-R
    Rated inductance82 uH ±20%
    Open circuit inductance (OCL)80.9 uH
    Irms (40 °C rise)2.01 A
    Isat1 (30% rolloff @ +25 °C)2.41 A
    Isat2 (40% rolloff @ +125 °C)1.93 A
    DCR typical @ 20 °C135 mOhm
    DCR maximum @ 20 °C162 mOhm
    K-factor (Bp-p = K x L x dI)12.8
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Reading the Data Sheet

    This is the automotive grade version of the drum core family: AEC-Q200 qualified, shielded, and rated to 165 °C including self-temperature rise. The electrical behaviour is familiar; the qualification and the mechanical build are not.

    The 165 °C figure is ambient plus self-temperature rise, which means the part can be genuinely hot in service. Derate the current for the real ambient, not for a 25 °C bench, and check the solder joint as well as the winding.

    Isat is a magnetic limit, not a thermal one. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C. Past it the inductance falls and the ripple climbs, and the current keeps flowing - nothing protects the switch except your own design margin.

    Where This Series Fits

    DRA125 is the 12.5 mm AEC-Q200 part at mid height - more current than DRA124, same footprint, so an upgrade does not force a board respin.

    • Typical applications: Automotive DC-DC converters, body control modules, LED lighting, ADAS, infotainment supplies.
    • Shielding matters in a module full of radios and sensors: the closed drum keeps the field in, but the layout still has to keep the hot loop small.
    • Data sheet 4319.

    Design Notes

    At 82 uH this part is in the middle of the family. The winding that produces that inductance is also what sets the 135 mOhm DCR - more turns, thinner wire, more resistance.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    What does AEC-Q200 cover?
    The qualification of the component itself: thermal shock, vibration, moisture, life and electrical stress. It does not qualify your assembly or your thermal design.

    Is the part shielded?
    Yes, magnetically shielded, which is what keeps the field out of the radios, sensors and ADAS front ends that share the module.

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products