Eaton DRA125-821-R Automotive Drum Core Inductor 820 uH
Eaton DRA125-821-R Automotive Drum Core Inductor 820 uH

Eaton DRA125-821-R Automotive Drum Core Inductor 820 uH

Share
Eaton DRA125-821-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 820 uH, 0.63 A, DCR 1.36 ohm.
    • Product Details
    • Download

    Eaton DRA125-821-R Automotive Drum Core Inductor 820 uH

    DRA125-821-R at a glance: shielded drum core inductor, 820 uH, 0.63 A Irms, 0.76 A Isat, DCR 1360 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberDRA125-821-R
    Rated inductance820 uH ±20%
    Open circuit inductance (OCL)814 uH
    Irms (40 °C rise)0.63 A
    Isat1 (30% rolloff @ +25 °C)0.76 A
    Isat2 (40% rolloff @ +125 °C)0.61 A
    DCR typical @ 20 °C1360 mOhm
    DCR maximum @ 20 °C1630 mOhm
    K-factor (Bp-p = K x L x dI)4
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    The Figures Explained

    This is the automotive grade version of the drum core family: AEC-Q200 qualified, shielded, and rated to 165 °C including self-temperature rise. The electrical behaviour is familiar; the qualification and the mechanical build are not.

    The 165 °C figure is ambient plus self-temperature rise, which means the part can be genuinely hot in service. Derate the current for the real ambient, not for a 25 °C bench, and check the solder joint as well as the winding.

    Isat is a magnetic limit, not a thermal one. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C. Past it the inductance falls and the ripple climbs, and the current keeps flowing - nothing protects the switch except your own design margin.

    Series Positioning

    DRA125 is the 12.5 mm AEC-Q200 part at mid height - more current than DRA124, same footprint, so an upgrade does not force a board respin.

    • Typical applications: Automotive DC-DC converters, body control modules, LED lighting, ADAS, infotainment supplies.
    • Shielding matters in a module full of radios and sensors: the closed drum keeps the field in, but the layout still has to keep the hot loop small.
    • Data sheet 4319.

    Sizing It Into a Design

    Choose 820 uH when the ripple target is at the high end of the design window: the DCR stays at 1360 mOhm and the saturation limit at 0.76 A leaves the transient room it needs.

    Thermal design is not optional here. The rated current assumes a 40 °C rise with the part in free air on a stated pad; inside a closed box, on a thin board, next to a hot IC, that assumption is gone.

    Frequently Asked Questions

    How does it differ from the commercial DR part of the same size?
    The electrical shape is similar, the qualification, the temperature range and often the terminal construction are not. Do not assume drop-in equivalence.

    Can I use it in a non-automotive design?
    Yes, and people do when they need the vibration and temperature headroom. You pay for the qualification you may not need.

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message