Eaton DRA127-220-R Automotive Drum Core Inductor 22 uH
Eaton DRA127-220-R Automotive Drum Core Inductor 22 uH

Eaton DRA127-220-R Automotive Drum Core Inductor 22 uH

Share
Eaton DRA127-220-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 22 uH, 3.98 A, DCR 40 mOhm.
    • Product Details
    • Download

    Eaton DRA127-220-R Automotive Drum Core Inductor 22 uH

    DRA127-220-R at a glance: shielded drum core inductor, 22 uH, 3.98 A Irms, 7.57 A Isat, DCR 40 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberDRA127-220-R
    Rated inductance22 uH ±20%
    Open circuit inductance (OCL)21.5 uH
    Irms (40 °C rise)3.98 A
    Isat1 (30% rolloff @ +25 °C)7.57 A
    Isat2 (40% rolloff @ +125 °C)6.05 A
    DCR typical @ 20 °C40 mOhm
    DCR maximum @ 20 °C47 mOhm
    K-factor (Bp-p = K x L x dI)16.2
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Reading the Data Sheet

    This is the automotive grade version of the drum core family: AEC-Q200 qualified, shielded, and rated to 165 °C including self-temperature rise. The electrical behaviour is familiar; the qualification and the mechanical build are not.

    The 165 °C figure is ambient plus self-temperature rise, which means the part can be genuinely hot in service. Derate the current for the real ambient, not for a 25 °C bench, and check the solder joint as well as the winding.

    Saturation degrades with temperature on ferrite. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C, and the hot value is the one that matters under a hood or inside a sealed enclosure.

    Where This Series Fits

    DRA127 is the tallest and highest-current AEC-Q200 drum core in the DRA range, up to 56 A. Built for the under-hood and high-vibration end of automotive.

    • Typical applications: Automotive power conversion, body electronics, lighting, ADAS, HVAC and seat control.
    • Under-hood thermal cycling is the hard part: the part is rated to 165 °C, but the solder joints and the PCB see the same cycles.
    • Data sheet 4319.

    Putting It to Work

    Choose 22 uH when the ripple target is in the middle of the design window: the DCR stays at 40 mOhm and the saturation limit at 7.57 A leaves the transient room it needs.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    Can I use it in a non-automotive design?
    Yes, and people do when they need the vibration and temperature headroom. You pay for the qualification you may not need.

    Can I use it in a non-automotive design?
    Yes, and people do when they need the vibration and temperature headroom. You pay for the qualification you may not need.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products