Eaton DRA127-6R8-R - 6.8 uH AEC-Q200 Power Inductor
Eaton DRA127-6R8-R - 6.8 uH AEC-Q200 Power Inductor

Eaton DRA127-6R8-R - 6.8 uH AEC-Q200 Power Inductor

Share
Eaton DRA127-6R8-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 6.8 uH, 6.52 A, DCR 15 mOhm.
    • Product Details
    • Download

    Eaton DRA127-6R8-R - 6.8 uH AEC-Q200 Power Inductor

    DRA127-6R8-R at a glance: shielded drum core inductor, 6.8 uH, 6.52 A Irms, 13.3 A Isat, DCR 15 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberDRA127-6R8-R
    Rated inductance6.8 uH ±20%
    Open circuit inductance (OCL)6.72 uH
    Irms (40 °C rise)6.52 A
    Isat1 (30% rolloff @ +25 °C)13.3 A
    Isat2 (40% rolloff @ +125 °C)10.7 A
    DCR typical @ 20 °C15 mOhm
    DCR maximum @ 20 °C18 mOhm
    K-factor (Bp-p = K x L x dI)28.6
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    How to Read These Ratings

    AEC-Q200 is the entry ticket, not the destination. This part is qualified to the automotive standard and rated to 165 °C ambient plus self-heating, in a shielded drum core built to survive shock and vibration rather than a laboratory bench.

    Thermal margin in a module is not the same as thermal margin on a bench. The ratings assume a mounting condition; the enclosure, the potting and the neighbouring components change it.

    The saturation current is measured at a defined roll-off, and Eaton states the percentage on the data sheet: Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C. Read the number with the percentage in hand, because "saturation" means different things at 25% and at 40%.

    Where This Series Fits

    DRA127 is the tallest and highest-current AEC-Q200 drum core in the DRA range, up to 56 A. Built for the under-hood and high-vibration end of automotive.

    • Typical applications: Automotive power conversion, body electronics, lighting, ADAS, HVAC and seat control.
    • Under-hood thermal cycling is the hard part: the part is rated to 165 °C, but the solder joints and the PCB see the same cycles.
    • Data sheet 4319.

    Sizing It Into a Design

    6.8 uH is in the middle of what this series covers. Moving up in inductance costs DCR and saturation current; moving down buys both, at the price of ripple.

    The loss budget is the whole story with a power inductor: core loss grows with frequency and flux swing, copper loss grows with current, and the two meet at a different point for every inductance in the series.

    Frequently Asked Questions

    Is the part shielded?
    Yes, magnetically shielded, which is what keeps the field out of the radios, sensors and ADAS front ends that share the module.

    Can I use it in a non-automotive design?
    Yes, and people do when they need the vibration and temperature headroom. You pay for the qualification you may not need.

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products