Eaton DRA127-820-R Automotive Shielded Inductor 3.84 A
Eaton DRA127-820-R Automotive Shielded Inductor 3.84 A

Eaton DRA127-820-R Automotive Shielded Inductor 3.84 A

Share
Eaton DRA127-820-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 82 uH, 2.01 A, DCR 155 mOhm.
    • Product Details
    • Download

    Eaton DRA127-820-R Automotive Shielded Inductor 3.84 A

    DRA127-820-R at a glance: shielded drum core inductor, 82 uH, 2.01 A Irms, 3.84 A Isat, DCR 155 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberDRA127-820-R
    Rated inductance82 uH ±20%
    Open circuit inductance (OCL)83.9 uH
    Irms (40 °C rise)2.01 A
    Isat1 (30% rolloff @ +25 °C)3.84 A
    Isat2 (40% rolloff @ +125 °C)3.07 A
    DCR typical @ 20 °C155 mOhm
    DCR maximum @ 20 °C186 mOhm
    K-factor (Bp-p = K x L x dI)8.2
    Package12.5 x 12.5 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    The Figures Explained

    This is the automotive grade version of the drum core family: AEC-Q200 qualified, shielded, and rated to 165 °C including self-temperature rise. The electrical behaviour is familiar; the qualification and the mechanical build are not.

    The 165 °C figure is ambient plus self-temperature rise, which means the part can be genuinely hot in service. Derate the current for the real ambient, not for a 25 °C bench, and check the solder joint as well as the winding.

    Saturation degrades with temperature on ferrite. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C, and the hot value is the one that matters under a hood or inside a sealed enclosure.

    Where This Series Fits

    DRA127 is the tallest and highest-current AEC-Q200 drum core in the DRA range, up to 56 A. Built for the under-hood and high-vibration end of automotive.

    • Typical applications: Automotive power conversion, body electronics, lighting, ADAS, HVAC and seat control.
    • Under-hood thermal cycling is the hard part: the part is rated to 165 °C, but the solder joints and the PCB see the same cycles.
    • Data sheet 4319.

    Design Notes

    82 uH is in the middle of what this series covers. Moving up in inductance costs DCR and saturation current; moving down buys both, at the price of ripple.

    Thermal design is not optional here. The rated current assumes a 40 °C rise with the part in free air on a stated pad; inside a closed box, on a thin board, next to a hot IC, that assumption is gone.

    Frequently Asked Questions

    Why are there two Isat values?
    The first is the 30% roll-off point at +25 °C, the second is the 40% roll-off at +125 °C. Hot ferrite saturates earlier, so the second number is the one to use at temperature.

    Is the part shielded?
    Yes, magnetically shielded, which is what keeps the field out of the radios, sensors and ADAS front ends that share the module.

    Can I use it in a non-automotive design?
    Yes, and people do when they need the vibration and temperature headroom. You pay for the qualification you may not need.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products