Eaton DRA74-680-R Automotive Drum Core Inductor 68 uH
Eaton DRA74-680-R Automotive Drum Core Inductor 68 uH

Eaton DRA74-680-R Automotive Drum Core Inductor 68 uH

Share
Eaton DRA74-680-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 68 uH, 1 A, DCR 286 mOhm.
    • Product Details
    • Download

    Eaton DRA74-680-R Automotive Drum Core Inductor 68 uH

    DRA74-680-R at a glance: shielded drum core inductor, 68 uH, 1 A Irms, 1.11 A Isat, DCR 286 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberDRA74-680-R
    Rated inductance68 uH ±20%
    Open circuit inductance (OCL)68.4 uH
    Irms (40 °C rise)1 A
    Isat1 (30% rolloff @ +25 °C)1.11 A
    Isat2 (40% rolloff @ +125 °C)0.89 A
    DCR typical @ 20 °C286 mOhm
    DCR maximum @ 20 °C343 mOhm
    K-factor (Bp-p = K x L x dI)33
    Package7.6 x 7.6 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Reading the Data Sheet

    This is the automotive grade version of the drum core family: AEC-Q200 qualified, shielded, and rated to 165 °C including self-temperature rise. The electrical behaviour is familiar; the qualification and the mechanical build are not.

    The 165 °C figure is ambient plus self-temperature rise, which means the part can be genuinely hot in service. Derate the current for the real ambient, not for a 25 °C bench, and check the solder joint as well as the winding.

    Isat is a magnetic limit, not a thermal one. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C. Past it the inductance falls and the ripple climbs, and the current keeps flowing - nothing protects the switch except your own design margin.

    What This Family Is For

    DRA74 shares the 7.6 mm pad with DRA73 and stands taller, which is how it reaches the higher current ratings in this size. AEC-Q200, 165 °C, shielded.

    • Typical applications: Automotive body control, LED drivers, ADAS modules, HVAC and seat controllers, infotainment.
    • Automotive derating practice usually wants margin on both Irms and Isat at the maximum ambient - do not size to the headline numbers alone.
    • Data sheet 4319.

    Sizing It Into a Design

    Choose 68 uH when the ripple target is in the middle of the design window: the DCR stays at 286 mOhm and the saturation limit at 1.11 A leaves the transient room it needs.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    What is the operating temperature?
    -40 °C to +165 °C, ambient plus self-temperature rise. That covers under-hood modules with margin for the rise.

    Can I use it in a non-automotive design?
    Yes, and people do when they need the vibration and temperature headroom. You pay for the qualification you may not need.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products