Eaton DRA74-8R2-R Automotive Drum Core Inductor 8.2 uH
Eaton DRA74-8R2-R Automotive Drum Core Inductor 8.2 uH

Eaton DRA74-8R2-R Automotive Drum Core Inductor 8.2 uH

Share
Eaton DRA74-8R2-R: AEC-Q200 Automotive Shielded Drum Core Inductor, 8.2 uH, 2.66 A, DCR 40 mOhm.
    • Product Details
    • Download

    Eaton DRA74-8R2-R Automotive Drum Core Inductor 8.2 uH

    DRA74-8R2-R at a glance: shielded drum core inductor, 8.2 uH, 2.66 A Irms, 3.17 A Isat, DCR 40 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberDRA74-8R2-R
    Rated inductance8.2 uH ±20%
    Open circuit inductance (OCL)8.51 uH
    Irms (40 °C rise)2.66 A
    Isat1 (30% rolloff @ +25 °C)3.17 A
    Isat2 (40% rolloff @ +125 °C)2.54 A
    DCR typical @ 20 °C40 mOhm
    DCR maximum @ 20 °C48 mOhm
    K-factor (Bp-p = K x L x dI)94.5
    Package7.6 x 7.6 mm footprint
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    The Figures Explained

    Under-hood and in-module electronics see temperature cycling, vibration and long service life. The DRA/DRAP/DRAQ parts are built for that: AEC-Q200, wider temperature range, and mechanical features that keep the part attached.

    The 165 °C figure is ambient plus self-temperature rise, which means the part can be genuinely hot in service. Derate the current for the real ambient, not for a 25 °C bench, and check the solder joint as well as the winding.

    Saturation degrades with temperature on ferrite. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C, and the hot value is the one that matters under a hood or inside a sealed enclosure.

    Positioning in the Range

    DRA74 shares the 7.6 mm pad with DRA73 and stands taller, which is how it reaches the higher current ratings in this size. AEC-Q200, 165 °C, shielded.

    • Typical applications: Automotive body control, LED drivers, ADAS modules, HVAC and seat controllers, infotainment.
    • Automotive derating practice usually wants margin on both Irms and Isat at the maximum ambient - do not size to the headline numbers alone.
    • Data sheet 4319.

    Design Notes

    Choose 8.2 uH when the ripple target is in the middle of the design window: the DCR stays at 40 mOhm and the saturation limit at 3.17 A leaves the transient room it needs.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    Is the part shielded?
    Yes, magnetically shielded, which is what keeps the field out of the radios, sensors and ADAS front ends that share the module.

    Why are there two Isat values?
    The first is the 30% roll-off point at +25 °C, the second is the 40% roll-off at +125 °C. Hot ferrite saturates earlier, so the second number is the one to use at temperature.

    Can I use it in a non-automotive design?
    Yes, and people do when they need the vibration and temperature headroom. You pay for the qualification you may not need.

    Design note: the 165 °C rating is ambient plus self-heating. Close the loss budget at the hot corner, with the maximum DCR and the hot Isat figure.

    Mechanical Dimensions

    eaton-dra-automotive-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message