Eaton DRAQ75-8R5-R 8.5 uH Coupled Drum Core Inductor
Eaton DRAQ75-8R5-R 8.5 uH Coupled Drum Core Inductor

Eaton DRAQ75-8R5-R 8.5 uH Coupled Drum Core Inductor

Share
Eaton DRAQ75-8R5-R: AEC-Q200 Dual Winding Automotive Drum Core Inductor, 8.5 uH, 3.57 A, DCR 49 mOhm.
    • Product Details
    • Download

    Eaton DRAQ75-8R5-R 8.5 uH Coupled Drum Core Inductor

    DRAQ75-8R5-R at a glance: dual-winding shielded drum core, 8.5 uH per winding, 3.57 A, DCR 49 mOhm max.

    Specification Table

    ParameterValue
    Orderable part numberDRAQ75-8R5-R
    Rated inductance8.5 uH ±20%
    Open circuit inductance (OCL)8.47 uH
    Irms (40 °C rise)3.57 A
    Isat1 (30% rolloff @ +25 °C)3.17 A
    Isat2 (40% rolloff @ +125 °C)2.54 A
    DCR maximum @ 20 °C49 mOhm
    K-factor (Bp-p = K x L x dI)90.7
    Series connection33.9 uH, 1.79 A
    Parallel connection8.5 uH, 3.57 A
    Turns ratio1:1, coupled
    Package7.6 x 7.6 x 4.5 mm
    MountingSurface mount
    Operating temperature-40 °C to +165 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    How to Read These Ratings

    Two windings on one core, and that is the whole idea: wire them in parallel and you get a high-current choke with a quarter of the inductance; wire them in series and you get four times the inductance at half the current. Same part, two very different components.

    The arithmetic is the usual one for coupled windings: parallel gives L/4 with 2x the current capability, series gives 4L with half. DCR follows the same rule - parallel halves the resistance, series doubles it.

    Isat is a magnetic limit, not a thermal one. Isat1 is the 30% rolloff point at +25 °C, Isat2 the 40% rolloff at +125 °C. Past it the inductance falls and the ripple climbs, and the current keeps flowing - nothing protects the switch except your own design margin.

    What This Family Is For

    DRAQ75 is an AEC-Q200 dual-winding drum core in a 7.6 x 7.6 x 4.5 mm body, with 500 Vdc isolation between windings. Parallel for current, series for inductance, coupled for a 1:1 transformer in a SEPIC or flyback.

    • Typical applications: Automotive LED drivers, body control modules, SEPIC and flyback converters, filter chokes.
    • 500 Vdc winding isolation is the highest in this group - it is still a functional rating, not reinforced insulation for a mains barrier.
    • Data sheet 11017.

    Design Notes

    8.5 uH sits in the middle of the range, and the trade at that point is explicit: - mOhm of DCR against 3.17 A of saturation headroom.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    Can I use it as a flyback transformer?
    Yes, within the isolation and the 1:1 ratio. Check the reflected voltage and the leakage inductance, because leakage is what creates the spike on the switch node.

    Does the coupling ratio matter?
    Yes. The turns ratio is 1:1, and the ripple cancellation depends on it. A part with a different ratio is not interchangeable in a coupled design.

    What is the OCL in parallel mode?
    With the windings paralleled the effective inductance is a quarter of the single-winding OCL; the datasheet lists the parallel rating explicitly.

    Design note: parallel and series ratings differ by about 4x. Read the column that matches the connection you intend to use, and keep the winding isolation rating in mind.

    Mechanical Dimensions

    eaton-draq75-automotive-shieleded-drum-core-power-inductor-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products