Eaton DRQ127-R47-R 1:1 Coupled Drum Core, 0.47 uH
Eaton DRQ127-R47-R 1:1 Coupled Drum Core, 0.47 uH

Eaton DRQ127-R47-R 1:1 Coupled Drum Core, 0.47 uH

Share
Eaton DRQ127-R47-R: Dual Winding Shielded Drum Core Inductor, 0.47 uH, 17.9 A, DCR 1.95 mOhm.
    • Product Details
    • Download

    Eaton DRQ127-R47-R 1:1 Coupled Drum Core, 0.47 uH

    DRQ127-R47-R at a glance: dual-winding shielded drum core, 0.47 uH per winding, 17.9 A, DCR 1.95 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberDRQ127-R47-R
    Rated inductance0.47 uH ±20%
    Open circuit inductance (OCL)0.42 uH
    Irms (40 °C rise)17.9 A
    Isat56 A
    DCR typical @ 20 °C1.95 mOhm
    Volt-microsecond rating3.5 V-us
    Series connection1.68 uH, 8.94 A
    Parallel connection0.47 uH, 17.9 A
    Turns ratio1:1, coupled
    Package12.5 x 12.5 mm footprint, 8.0 mm max height
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant (-R suffix)

    Reading the Data Sheet

    The DRQ/DRAQ construction puts two windings on a shielded drum core with a defined 1:1 turns ratio. That ratio is what makes the part useful as a transformer: the two windings share flux, so the magnetising current is common and the ripple can be made to cancel.

    Coupled operation is where the part earns its keep: with the right duty cycle the two windings cancel part of the ripple, so the output capacitor sees less AC current and the converter can run at a lower switching frequency for the same ripple.

    The saturation current is measured at a defined roll-off, and Eaton states the percentage on the data sheet: Isat is the peak current for approximately 30% rolloff at +20 °C. Read the number with the percentage in hand, because "saturation" means different things at 25% and at 40%.

    Series Positioning

    DRQ127 is the tallest dual-winding DRQ at 8.0 mm and the highest-current part in the family, up to 56 A peak in parallel mode. Two windings, one core, and the option to use it as a transformer.

    • Typical applications: High current DC-DC, server power, SEPIC and flyback, battery systems, filter chokes.
    • The parallel rating is not double the single-winding rating of the same size - check both windings' DCR and the thermal path before assuming it.
    • Data sheet DS4311.

    Sizing It Into a Design

    0.47 uH sits at the low end of the range, and the trade at that point is explicit: 1.95 mOhm of DCR against 56 A of saturation headroom.

    Efficiency is set by where you sit on the loss curve, and the curve moves with switching frequency. A part that is excellent at 300 kHz can be mediocre at 1 MHz with the same current, because the core loss term takes over.

    Frequently Asked Questions

    What is the OCL in parallel mode?
    With the windings paralleled the effective inductance is a quarter of the single-winding OCL; the datasheet lists the parallel rating explicitly.

    What is the OCL in parallel mode?
    With the windings paralleled the effective inductance is a quarter of the single-winding OCL; the datasheet lists the parallel rating explicitly.

    Can I use it as a flyback transformer?
    Yes, within the isolation and the 1:1 ratio. Check the reflected voltage and the leakage inductance, because leakage is what creates the spike on the switch node.

    Design note: decide the connection before you lay out the board. Parallel, series and coupled all use the same part, and the inductance moves by 4x between them.

    Mechanical Dimensions

    eaton-drq-shielded-drum-core-power-inductors-data-sheet mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products