Eaton ECMS1V0704-141-R - Surface-Mount Common-Mode Choke 140 Ohm
Eaton ECMS1V0704-141-R - Surface-Mount Common-Mode Choke 140 Ohm

Eaton ECMS1V0704-141-R - Surface-Mount Common-Mode Choke 140 Ohm

Share
Eaton ECMS1V0704-141-R: SMD Common-Mode Choke, 140 Ohm impedance, DCR 10 mOhm.
    • Product Details
    • Download

    Eaton ECMS1V0704-141-R - Surface-Mount Common-Mode Choke 140 Ohm

    ECMS1V0704-141-R at a glance: SMD common-mode choke, 140 Ohm impedance @ 100 MHz, 9 A max, DCR 10 mOhm max.

    Electrical Specifications

    ParameterValue
    Orderable part numberECMS1V0704-141-R
    Impedance minimum @ 100 MHz100 Ohm
    Impedance typical @ 100 MHz140 Ohm
    DCR maximum @ +25 °C10 mOhm
    Rated current maximum9 A
    Rated voltage maximum80 Vdc
    Insulation resistance minimum10 MOhm
    Package8.0 x 6.5 mm footprint, 3.8 mm height, up to 15 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant (-R suffix)

    Mechanical Drawing

    ECMS1V0704-141-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    Reading the Data Sheet

    Where a single line needs a differential choke and the board has no room for a filter stage, the common-mode choke is the efficient answer: two windings, one core, and the noise path attenuated in a single component.

    Impedance is quoted at 100 MHz with the windings in parallel - the frequency band where switching harmonics actually radiate. The minimum column is the guaranteed production limit; the typical column is what most parts deliver.

    The DCR sits in the power path, so every milliohm is loss on the supply lines: 10 mOhm maximum at 9 A is a deliberate trade the family makes against impedance in the same footprint.

    Copper loss is the efficiency floor. 10 mOhm at 25 °C rises about 30% by 100 °C, so the hot-corner budget should use the maximum column, not the typical.

    Positioning in the Range

    ECMS is the surface-mount common-mode family for battery-powered, renewable energy, smart meter and industrial equipment: high-frequency filtering on a closed square core, with current ratings up to 15 A across the three footprints.

    • Typical applications: battery backup, renewable energy products, smart meters, LED lighting, industrial IoT, motion controls, power supplies, medical equipment.
    • The rated current is a maximum for the winding; at high ambient the thermal budget, not the current column, decides the safe operating point.
    • Data sheet ELX1112; footprint 8.0 x 6.5 mm footprint, 3.8 mm height, up to 15 A.

    Sizing It Into a Design

    Frequently Asked Questions

    Will it filter differential noise?
    Only through leakage; common-mode chokes are not differential filters. Pair with an X-capacitor for differential noise.

    Will it filter differential noise?
    Only through leakage; common-mode chokes are not differential filters. Pair with an X-capacitor for differential noise.

    What is the MSL rating?
    Moisture sensitivity level 1 - unlimited floor life before reflow.

    Design note: pick the impedance from the noise band you need to attenuate, then verify the rated current covers the DC on both lines combined.

    Mechanical Dimensions

    eaton-ecms1V0704-surface-mount-common-mode-choke-data-sheet-elx1112-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products