Eaton ECMS1V0704-451-R - Surface-Mount Common-Mode Choke 450 Ohm
Eaton ECMS1V0704-451-R - Surface-Mount Common-Mode Choke 450 Ohm

Eaton ECMS1V0704-451-R - Surface-Mount Common-Mode Choke 450 Ohm

Share
Eaton ECMS1V0704-451-R: SMD Common-Mode Choke, 450 Ohm impedance, DCR 10 mOhm.
    • Product Details
    • Download

    Eaton ECMS1V0704-451-R - Surface-Mount Common-Mode Choke 450 Ohm

    ECMS1V0704-451-R at a glance: SMD common-mode choke, 450 Ohm impedance @ 100 MHz, 5 A max, DCR 10 mOhm max.

    Specification Table

    ParameterValue
    Orderable part numberECMS1V0704-451-R
    Impedance minimum @ 100 MHz275 Ohm
    Impedance typical @ 100 MHz450 Ohm
    DCR maximum @ +25 °C10 mOhm
    Rated current maximum5 A
    Rated voltage maximum80 Vdc
    Insulation resistance minimum10 MOhm
    Package8.0 x 6.5 mm footprint, 3.8 mm height, up to 15 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant (-R suffix)

    Outline Drawing

    ECMS1V0704-451-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    What the Numbers Mean

    A common-mode choke works by cancellation: the two supply lines pass through windings wound so that differential current produces no net flux, while common-mode noise - the current that returns through earth or leaks across insulation - sees the full impedance of the core. This part is built for exactly that job at high frequency, on a square closed magnetic core that keeps the field inside the body.

    Impedance is quoted at 100 MHz with the windings in parallel - the frequency band where switching harmonics actually radiate. The minimum column is the guaranteed production limit; the typical column is what most parts deliver.

    The DCR sits in the power path, so every milliohm is loss on the supply lines: 10 mOhm maximum at 5 A is a deliberate trade the family makes against impedance in the same footprint.

    The typical and the maximum DCR are both quoted for a reason: production spread. A loss budget that has to hold across a build uses 10 mOhm as the optimistic case and plans against the maximum.

    What This Family Is For

    ECMS is the surface-mount common-mode family for battery-powered, renewable energy, smart meter and industrial equipment: high-frequency filtering on a closed square core, with current ratings up to 15 A across the three footprints.

    • Typical applications: battery backup, renewable energy products, smart meters, LED lighting, industrial IoT, motion controls, power supplies, medical equipment.
    • The rated current is a maximum for the winding; at high ambient the thermal budget, not the current column, decides the safe operating point.
    • Data sheet ELX1112; footprint 8.0 x 6.5 mm footprint, 3.8 mm height, up to 15 A.

    Putting It to Work

    Frequently Asked Questions

    What does the impedance number mean?
    It is the impedance the choke presents to common-mode noise at 100 MHz, measured with the windings in parallel at +25 °C. The minimum is the guaranteed value; the typical is the centre of the distribution.

    Will it filter differential noise?
    Only through leakage; common-mode chokes are not differential filters. Pair with an X-capacitor for differential noise.

    Will it filter differential noise?
    Only through leakage; common-mode chokes are not differential filters. Pair with an X-capacitor for differential noise.

    Design note: pick the impedance from the noise band you need to attenuate, then verify the rated current covers the DC on both lines combined.

    Mechanical Dimensions

    eaton-ecms1V0704-surface-mount-common-mode-choke-data-sheet-elx1112-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message