Eaton ECMS1V1306-701-R 700 Ohm Common-Mode Choke
Eaton ECMS1V1306-701-R 700 Ohm Common-Mode Choke

Eaton ECMS1V1306-701-R 700 Ohm Common-Mode Choke

Share
Eaton ECMS1V1306-701-R: SMD Common-Mode Choke, 700 Ohm impedance, DCR 6 mOhm.
    • Product Details
    • Download

    Eaton ECMS1V1306-701-R 700 Ohm Common-Mode Choke

    ECMS1V1306-701-R at a glance: SMD common-mode choke, 700 Ohm impedance @ 100 MHz, 8 A max, DCR 6 mOhm max.

    Ratings at a Glance

    ParameterValue
    Orderable part numberECMS1V1306-701-R
    Impedance minimum @ 100 MHz500 Ohm
    Impedance typical @ 100 MHz700 Ohm
    DCR maximum @ +25 °C6 mOhm
    Rated current maximum8 A
    Rated voltage maximum80 Vdc
    Insulation resistance minimum10 MOhm
    Package13 x 11.3 mm footprint, 6.4 mm height, up to 10 A
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant (-R suffix)

    Mechanical Dimensions & Pad Layout

    ECMS1V1306-701-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    Reading the Data Sheet

    Where a single line needs a differential choke and the board has no room for a filter stage, the common-mode choke is the efficient answer: two windings, one core, and the noise path attenuated in a single component.

    Impedance is quoted at 100 MHz with the windings in parallel - the frequency band where switching harmonics actually radiate. The minimum column is the guaranteed production limit; the typical column is what most parts deliver.

    The DCR sits in the power path, so every milliohm is loss on the supply lines: 6 mOhm maximum at 8 A is a deliberate trade the family makes against impedance in the same footprint.

    DCR 6 mOhm is the conduction loss: at rated current it dissipates 0.00 W, and that heat has to leave through the terminals and the board.

    Series Positioning

    ECMS is the surface-mount common-mode family for battery-powered, renewable energy, smart meter and industrial equipment: high-frequency filtering on a closed square core, with current ratings up to 15 A across the three footprints.

    • Typical applications: battery backup, renewable energy products, smart meters, LED lighting, industrial IoT, motion controls, power supplies, medical equipment.
    • The rated current is a maximum for the winding; at high ambient the thermal budget, not the current column, decides the safe operating point.
    • Data sheet ELX1114; footprint 13 x 11.3 mm footprint, 6.4 mm height, up to 10 A.

    Sizing It Into a Design

    Frequently Asked Questions

    Does DC bias affect the impedance?
    Modestly. The core is sized so that the rated current does not saturate the path, but large unbalanced DC shifts the operating point - keep the lines balanced.

    Will it filter differential noise?
    Only through leakage; common-mode chokes are not differential filters. Pair with an X-capacitor for differential noise.

    What is the MSL rating?
    Moisture sensitivity level 1 - unlimited floor life before reflow.

    Design note: pick the impedance from the noise band you need to attenuate, then verify the rated current covers the DC on both lines combined.

    Mechanical Dimensions

    eaton-ecms1v1306-surface-mount-common-mode-choke-data-sheet-elx1114-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products