Eaton EPM25752V-12R-1R6D 19.992 W DC-DC, 12V Output
Eaton EPM25752V-12R-1R6D 19.992 W DC-DC, 12V Output

Eaton EPM25752V-12R-1R6D 19.992 W DC-DC, 12V Output

Share
EPM25752V-12R-1R6D: Isolated DC-DC Converter, 18-75 V input, ±12 V output, ±1666 mA, 19.99 W, 90 % typical efficiency.
    • Product Details
    • Download

    Eaton EPM25752V-12R-1R6D 19.992 W DC-DC, 12V Output

    EPM25752V-12R-1R6D at a glance: Isolated DC-DC Converter, 18-75 V input, ±12 V output, ±1666 mA, 19.99 W, 90 % typical efficiency.

    Electrical Specifications

    ParameterValue
    Orderable part numberEPM25752V-12R-1R6D
    Input voltage range18-75 Vdc (nominal 48 V)
    Output voltage±12 Vdc
    Output current at full load±1666 mA
    Output power19.99 W
    Efficiency, minimum89 %
    Efficiency, typical90 %
    Capacitive load, maximum2600 uF
    Isolation voltage1.6 kVdc
    PackageSee dimension drawing
    Operating temperature-40 °C to +105 °C
    QualificationIndustrial
    RoHSCompliant
    Data sheetEaton Technical Data ELX1167

    Mechanical drawing, derating curve and application circuits are on the
    following pages of Eaton Technical Data ELX1167.

    How to Read These Ratings

    This is a regulated isolated converter with a fixed switching frequency around 250 kHz, remote on/off, and no minimum load requirement. The no-minimum-load point matters: many converters of this class need a bleeder resistor to stay in regulation, and this one does not.

    At 19.992 W out and 90 % typical efficiency the module dissipates about 2.22 W. That is the number the thermal design has to carry, not the output power.

    Series Positioning

    The 25 series covers 15, 30, 40 and 60 W in a 2 x 1 inch case, with 9-36 V and 18-75 V input ranges and single or dual outputs.

    • At 60 W the case dissipates several watts. Plan the thermal path before choosing the enclosure.

    Frequently Asked Questions

    What does the wide input range buy me?
    A 9-36 V input covers a 24 V bus with transients; 18-75 V covers a 48 V bus. The converter holds regulation across the whole range, so the battery can sag without dropping the rail.

    How is the case cooled?
    Through the baseplate into the board or a heatsink. At 60 W the efficiency loss is several watts, so the thermal path is part of the design, not an afterthought.

    How is the case cooled?
    Through the baseplate into the board or a heatsink. At 60 W the efficiency loss is several watts, so the thermal path is part of the design, not an afterthought.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products