Eaton EPM25752V-3R3-10RS 33 W DC-DC, 3.3V Output
Eaton EPM25752V-3R3-10RS 33 W DC-DC, 3.3V Output

Eaton EPM25752V-3R3-10RS 33 W DC-DC, 3.3V Output

Share
EPM25752V-3R3-10RS: Isolated DC-DC Converter, 18-75 V input, 3.3 V output, 10000 mA, 33 W, 89 % typical efficiency.
    • Product Details
    • Download

    Eaton EPM25752V-3R3-10RS 33 W DC-DC, 3.3V Output

    EPM25752V-3R3-10RS at a glance: Isolated DC-DC Converter, 18-75 V input, 3.3 V output, 10000 mA, 33 W, 89 % typical efficiency.

    Electrical Specifications

    ParameterValue
    Orderable part numberEPM25752V-3R3-10RS
    Input voltage range18-75 Vdc (nominal 48 V)
    Output voltage3.3 Vdc
    Output current at full load10000 mA
    Output power33 W
    Efficiency, minimum88 %
    Efficiency, typical89 %
    Capacitive load, maximum26600 uF
    Isolation voltage1.6 kVdc
    PackageSee dimension drawing
    Operating temperature-40 °C to +105 °C
    QualificationIndustrial
    RoHSCompliant
    Data sheetEaton Technical Data ELX1167

    Mechanical drawing, derating curve and application circuits are on the
    following pages of Eaton Technical Data ELX1167.

    What the Numbers Mean

    This is a regulated isolated converter with a fixed switching frequency around 250 kHz, remote on/off, and no minimum load requirement. The no-minimum-load point matters: many converters of this class need a bleeder resistor to stay in regulation, and this one does not.

    At 33 W out and 89 % typical efficiency the module dissipates about 4.08 W. That is the number the thermal design has to carry, not the output power.

    Series Positioning

    The 25 series covers 15, 30, 40 and 60 W in a 2 x 1 inch case, with 9-36 V and 18-75 V input ranges and single or dual outputs.

    • At 60 W the case dissipates several watts. Plan the thermal path before choosing the enclosure.

    Frequently Asked Questions

    What does the wide input range buy me?
    A 9-36 V input covers a 24 V bus with transients; 18-75 V covers a 48 V bus. The converter holds regulation across the whole range, so the battery can sag without dropping the rail.

    How is the case cooled?
    Through the baseplate into the board or a heatsink. At 60 W the efficiency loss is several watts, so the thermal path is part of the design, not an afterthought.

    Can I trim the output?
    The output is adjustable by about ±10 percent through the trim pin. That is enough to compensate cable drop, not enough to change the rail voltage.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products