Eaton EPM7121V-3R3-303SH 1 W Isolated DC-DC Converter 12Vin
Eaton EPM7121V-3R3-303SH 1 W Isolated DC-DC Converter 12Vin

Eaton EPM7121V-3R3-303SH 1 W Isolated DC-DC Converter 12Vin

Share
EPM7121V-3R3-303SH: Isolated DC-DC Converter, 12 V input, 3.3 V output, 303 mA, 1 W, 79 % typical efficiency.
    • Product Details
    • Download

    Eaton EPM7121V-3R3-303SH 1 W Isolated DC-DC Converter 12Vin

    EPM7121V-3R3-303SH at a glance: Isolated DC-DC Converter, 12 V input, 3.3 V output, 303 mA, 1 W, 79 % typical efficiency.

    Ratings at a Glance

    ParameterValue
    Orderable part numberEPM7121V-3R3-303SH
    Input voltage range12 Vdc
    Output voltage3.3 Vdc
    Output current at full load303 mA
    Output power1 W
    Efficiency, minimum76 %
    Efficiency, typical79 %
    Capacitive load, maximum1500 uF
    Isolation voltage4 kVdc
    PackageSIP
    Operating temperature-40 °C to +100 °C
    QualificationIndustrial
    RoHSCompliant
    Data sheetEaton Technical Data ELX1164

    Mechanical drawing, derating curve and application circuits are on the
    following pages of Eaton Technical Data ELX1164.

    How to Read These Ratings

    A one-watt isolated DC-DC module in a SIP or DIP footprint: 5, 12 or 24 V in, single or dual output out, with galvanic isolation between the two sides. It is the part that breaks a ground loop or floats a gate driver supply when a full converter would be overkill.

    At 0.9999 W out and 79 % typical efficiency the module dissipates about 0.27 W. That is the number the thermal design has to carry, not the output power.

    Series Positioning

    The 1 W isolated range covers 5, 12 and 24 V inputs with single or dual outputs from 3.3 V to 15 V, in SIP and DIP packages with standard or high isolation.

    • The isolation barrier is only as good as the board creepage around it. Check the pad spacing, not just the module rating.

    Frequently Asked Questions

    Can the output be paralleled?
    Not directly. Two isolated modules will not share current without droop sharing or a series resistor, because their output voltages differ by the tolerance band.

    Can the output be paralleled?
    Not directly. Two isolated modules will not share current without droop sharing or a series resistor, because their output voltages differ by the tolerance band.

    Can the output be paralleled?
    Not directly. Two isolated modules will not share current without droop sharing or a series resistor, because their output voltages differ by the tolerance band.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products