Eaton EPM7241V-3R3-303SH 1 W Isolated DC-DC Converter 24Vin
Eaton EPM7241V-3R3-303SH 1 W Isolated DC-DC Converter 24Vin

Eaton EPM7241V-3R3-303SH 1 W Isolated DC-DC Converter 24Vin

Share
EPM7241V-3R3-303SH: Isolated DC-DC Converter, 24 V input, 3.3 V output, 303 mA, 1 W, 78 % typical efficiency.
    • Product Details
    • Download

    Eaton EPM7241V-3R3-303SH 1 W Isolated DC-DC Converter 24Vin

    EPM7241V-3R3-303SH at a glance: Isolated DC-DC Converter, 24 V input, 3.3 V output, 303 mA, 1 W, 78 % typical efficiency.

    Specification Table

    ParameterValue
    Orderable part numberEPM7241V-3R3-303SH
    Input voltage range24 Vdc
    Output voltage3.3 Vdc
    Output current at full load303 mA
    Output power1 W
    Efficiency, minimum75 %
    Efficiency, typical78 %
    Capacitive load, maximum1500 uF
    Isolation voltage4 kVdc
    PackageSIP
    Operating temperature-40 °C to +100 °C
    QualificationIndustrial
    RoHSCompliant
    Data sheetEaton Technical Data ELX1164

    Mechanical drawing, derating curve and application circuits are on the
    following pages of Eaton Technical Data ELX1164.

    How to Read These Ratings

    These modules are chosen for isolation first and power second. One watt at 70 to 85 percent efficiency is not a thermal problem; the questions are the isolation voltage, the regulation across the load range and whether the output can start into a capacitive load.

    At 0.9999 W out and 78 % typical efficiency the module dissipates about 0.28 W. That is the number the thermal design has to carry, not the output power.

    Positioning in the Range

    The 1 W isolated range covers 5, 12 and 24 V inputs with single or dual outputs from 3.3 V to 15 V, in SIP and DIP packages with standard or high isolation.

    • The isolation barrier is only as good as the board creepage around it. Check the pad spacing, not just the module rating.

    Frequently Asked Questions

    Does it need external capacitors?
    The data sheet recommends input and output capacitors to meet the ripple figure. The module runs without them, but not to specification.

    Does it need external capacitors?
    The data sheet recommends input and output capacitors to meet the ripple figure. The module runs without them, but not to specification.

    Why is the no-load input current specified?
    Because a 1 W module can draw 20 to 30 mA with nothing connected. In a battery-powered design that idle current can be the dominant loss.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products