
| Parameter | Value |
|---|---|
| Orderable part number | EPM78V1-01R8-01R0R |
| Input voltage range | 4.75-26 Vdc |
| Output voltage | 1.8 Vdc |
| Output current at full load | 1000 mA |
| Output power | 1.8 W |
| Efficiency (max. / min. input) | 86.0/77.5 % |
| Input current, no load | 10 mA |
| Capacitive load, maximum | 470 uF |
| Package | SIP |
| Operating temperature | -40 °C to +105 °C |
| Qualification | Industrial |
| RoHS | Compliant |
| Data sheet | Eaton Technical Data 11181 |
Mechanical drawing, derating curve and application circuits are on the
following pages of Eaton Technical Data 11181.
The point of a 78xx replacement is thermal: a linear regulator dissipating 7 V at 1 A needs a heatsink, this part does not. The trade is switching noise, which is why the ripple figure and the input capacitor recommendation matter.
The input has to stay above 4.75 V for a 1.8 V output, which is about 3.0 V of headroom at the minimum. Below that the module drops out like the linear regulator it replaces.
The EPM78 series covers six fixed outputs from 1.8 V to 15 V at 1 A, all pin-compatible with the LM78xx footprint.
What about the switching noise?
It switches at 500 kHz, so the ripple is specified in millivolts peak-to-peak. For an analog load, add an LC filter after the module.
Is the output isolated?
No. Input and output share a ground; this is a replacement for a linear regulator, not an isolated module.
Is the output isolated?
No. Input and output share a ground; this is a replacement for a linear regulator, not an isolated module.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd