
| Parameter | Value |
|---|---|
| Orderable part number | EPM78V2-06R5-01R0R |
| Input voltage range | 8-32 Vdc |
| Output voltage | 6.5 Vdc |
| Output current at full load | 1000 mA |
| Output power | 6.5 W |
| Efficiency (max. / min. input) | 94.0/88.0 % |
| Input current, no load | 20 mA |
| Capacitive load, maximum | 470 uF |
| Package | SIP |
| Operating temperature | -40 °C to +105 °C |
| Qualification | Industrial |
| RoHS | Compliant |
| Data sheet | Eaton Technical Data 11181 |
Mechanical drawing, derating curve and application circuits are on the
following pages of Eaton Technical Data 11181.
Six output voltages from 1.8 V to 15 V, all at 1 A, all in the same package with the same pinout. The input range depends on the output: a 1.8 V part accepts 4.75 V minimum, the 15 V part needs 18 V.
The input has to stay above 8 V for a 6.5 V output, which is about 1.5 V of headroom at the minimum. Below that the module drops out like the linear regulator it replaces.
The EPM78 series covers six fixed outputs from 1.8 V to 15 V at 1 A, all pin-compatible with the LM78xx footprint.
Why does the minimum input voltage depend on the output?
Because the part is a step-down converter: the input has to stay above the output plus the dropout. A 15 V output needs 18 V in, a 1.8 V output needs 4.75 V.
Can it replace a 7805 directly?
Electrically yes, but check the pinout: some 78xx clones swap the pin order. The Eaton part follows the standard SIP sequence, and the input capacitor is still required.
What about the switching noise?
It switches at 500 kHz, so the ripple is specified in millivolts peak-to-peak. For an analog load, add an LC filter after the module.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd