Eaton EXLA1V0808-3R3-R 3.3 AEC-Q200 Molded Inductor, 18 A
Eaton EXLA1V0808-3R3-R 3.3 AEC-Q200 Molded Inductor, 18 A

Eaton EXLA1V0808-3R3-R 3.3 AEC-Q200 Molded Inductor, 18 A

Share
Eaton EXLA1V0808-3R3-R: AEC-Q200 Automotive Molded Power Inductor, 3.3 uH, 18 A, DCR 6.6 mOhm.
    • Product Details
    • Download

    Eaton EXLA1V0808-3R3-R 3.3 AEC-Q200 Molded Inductor, 18 A

    EXLA1V0808-3R3-R at a glance: AEC-Q200 molded inductor, 3.3 uH, 18 A Irms, Isat 20 A, DCR 6.6 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberEXLA1V0808-3R3-R
    OCL3.3 uH ±20%
    Irms18 A
    Isat (30% rolloff @ +25 °C)20 A
    DCR typical @ +25 °C6.6 mOhm
    DCR maximum @ +25 °C7.3 mOhm
    Rated operating voltage (across inductor)40 V
    Package9.2 x 8.8 mm footprint, 8.0 mm height
    MountingSurface mount
    Operating temperature-55 °C to +155 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Outline Drawing

    EXLA1V0808-3R3-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    The Figures Explained

    This is the part for automotive DC rails that cannot afford a collapsing inductor: AEC-Q200 qualified, soft saturation, shielded, and rated across the full -55 to +155 °C range. The electrical behaviour matches the commercial moulded family; the qualification and the temperature rating do not.

    The typical and the maximum DCR are both quoted for a reason: production spread. A loss budget that has to hold across a build uses 6.6 mOhm as the optimistic case and plans against the maximum.

    Isat is the peak current for approximately 30% rolloff at +25 °C. In a multiphase converter the transient peak lands on the inductors before the loop corrects; a soft-saturating core keeps controlling di/dt through exactly that window.

    The 155 °C rating is ambient plus self-heating, and the alloy powder core keeps its soft-saturation shape across that range - the transient behaviour at the hot corner is a milder version of the room-temperature curve, not a different part.

    What This Family Is For

    EXLA is the automotive moulded family: AEC-Q200 qualified, soft-saturating, shielded, rated to 155 °C - the power-inductor choice for ADAS, body electronics and infotainment rails.

    • Typical applications: ADAS power rails, body electronics, infotainment, zonal modules and other automotive DC-DC stages.
    • Automotive derating practice: size against Isat and the hot DCR at the worst ambient, with margin for the load transient.
    • Data sheet ELX1250; footprint 9.2 x 8.8 mm footprint, 8.0 mm height.

    Sizing and Layout Notes

    Frequently Asked Questions

    Is this AEC-Q200 qualified?
    Yes - the family is qualified to the automotive passive-component standard, including the terminal-strength and vibration test methods referenced on the datasheet.

    Is this AEC-Q200 qualified?
    Yes - the family is qualified to the automotive passive-component standard, including the terminal-strength and vibration test methods referenced on the datasheet.

    What is the temperature range?
    -55 °C to +155 °C, ambient plus self-temperature rise. The part should not exceed +155 °C under worst-case operating conditions.

    Design note: budget the loss at the hot corner with the maximum DCR, and keep the transient peak below Isat with margin - the soft curve forgives, but does not eliminate, saturation.

    Mechanical Dimensions

    eaton-exla1v08-automotive-high-current-molded-inductor-data-sheet-elx1250-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products