Eaton EXLA1V1003-R56-R - 0.56 uH AEC-Q200 High-Current Inductor
Eaton EXLA1V1003-R56-R - 0.56 uH AEC-Q200 High-Current Inductor

Eaton EXLA1V1003-R56-R - 0.56 uH AEC-Q200 High-Current Inductor

Share
Eaton EXLA1V1003-R56-R: AEC-Q200 Automotive Molded Power Inductor, 0.56 uH, 32 A, DCR 2.5 mOhm.
    • Product Details
    • Download

    Eaton EXLA1V1003-R56-R - 0.56 uH AEC-Q200 High-Current Inductor

    EXLA1V1003-R56-R at a glance: AEC-Q200 molded inductor, 0.56 uH, 32 A Irms, Isat 39 A, DCR 2.5 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberEXLA1V1003-R56-R
    OCL0.56 uH ±20%
    Irms32 A
    Isat (30% rolloff @ +25 °C)39 A
    DCR typical @ +25 °C2.5 mOhm
    DCR maximum @ +25 °C2.75 mOhm
    Rated operating voltage (across inductor)40 V
    Package12.2 x 11.3 mm footprint, 3.1 mm height
    MountingSurface mount
    Operating temperature-55 °C to +155 °C
    QualificationAEC-Q200
    RoHSCompliant (-R suffix)

    Mechanical Dimensions & Pad Layout

    EXLA1V1003-R56-R mechanical dimensions and pad layout

    Drawings from the Eaton data sheet: mechanical outline with rated mm dimensions, recommended PCB pad layout, and winding schematic. Tolerances and pad tolerances are stated on the drawing itself.

    What the Numbers Mean

    Automotive qualification on a moulded inductor means the mechanical construction is as carefully specified as the electrical one: the moulded body survives thermal cycling, the shield keeps EMI out of the radios, and the soft-saturation core keeps the rail alive through transients at temperature.

    At 2.5 mOhm the winding dominates the loss budget at load. The moulded construction spreads that heat into the body, but the board the part sits on still decides the actual temperature rise.

    Isat is defined as the peak current for approximately 30% rolloff at +25 °C. With an alloy powder core the rolloff is soft: past Isat the inductance keeps working, just lower - which is a design resource, not an excuse to run at the limit.

    The 155 °C rating is ambient plus self-heating, and the alloy powder core keeps its soft-saturation shape across that range - the transient behaviour at the hot corner is a milder version of the room-temperature curve, not a different part.

    Where This Series Fits

    EXLA is the automotive moulded family: AEC-Q200 qualified, soft-saturating, shielded, rated to 155 °C - the power-inductor choice for ADAS, body electronics and infotainment rails.

    • Typical applications: ADAS power rails, body electronics, infotainment, zonal modules and other automotive DC-DC stages.
    • Automotive derating practice: size against Isat and the hot DCR at the worst ambient, with margin for the load transient.
    • Data sheet ELX1251; footprint 12.2 x 11.3 mm footprint, 3.1 mm height.

    Sizing and Layout Notes

    Frequently Asked Questions

    What does "soft saturation" mean in practice?
    The alloy powder core loses inductance gradually with current instead of collapsing. At transient peaks the inductor still limits di/dt - it is the behaviour that keeps a multiphase rail stable through load steps.

    Can I substitute it for the commercial EXL part of the same size?
    The electrical rows are close, but the qualification, temperature range and the test data are not interchangeable. Substitute on the datasheet row, not on the family name.

    What does "soft saturation" mean in practice?
    The alloy powder core loses inductance gradually with current instead of collapsing. At transient peaks the inductor still limits di/dt - it is the behaviour that keeps a multiphase rail stable through load steps.

    Design note: budget the loss at the hot corner with the maximum DCR, and keep the transient peak below Isat with margin - the soft curve forgives, but does not eliminate, saturation.

    Mechanical Dimensions

    eaton-exla1v10-automotive-high-current-molded-inductor-data-sheet-elx1251-en mechanical dimensions and recommended pad layout

    Dimensional drawing and recommended PCB pad layout from the Eaton data sheet. Tolerances and pad dimensions are as printed on the drawing; check the outline against your layout before release.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products