Eaton HCM1A0805V2-1R0-R 1.0 uH AEC-Q200 Inductor, 14 A
Eaton HCM1A0805V2-1R0-R 1.0 uH AEC-Q200 Inductor, 14 A

Eaton HCM1A0805V2-1R0-R 1.0 uH AEC-Q200 Inductor, 14 A

Share
Eaton HCM1A0805V2-1R0-R: AEC-Q200 automotive power inductor, 1.0 uH ±20%, 14 A Irms, Isat 15 A, DCR 4 mOhm, 8.4 x 8 mm.
    • Product Details
    • Download

    Eaton HCM1A0805V2-1R0-R 1.0 uH AEC-Q200 Inductor, 14 A

    HCM1A0805V2-1R0-R at a glance: AEC-Q200 automotive power inductor, 1.0 uH ±20%, 14 A Irms, Isat 15 A (20% rolloff @ +25 °C), DCR 4 mOhm, 8.4 x 8 mm.

    Key Specifications

    ParameterValue
    Orderable part numberHCM1A0805V2-1R0-R
    OCL (open circuit inductance)1.0 uH ±20%
    FLL minimum, at Isat0.64 uH
    Irms (DC, 40 °C rise)14 A
    Isat (20% rolloff @ +25 °C)15 A
    DCR typical @ +20 °C4 mOhm
    DCR maximum @ +20 °C4.8 mOhm
    SRF typical40 MHz
    K-factor (Bp-p = K x L x dI)265, Bp-p in Gauss
    Package8.4 x 8 mm
    Height5.4 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10902

    Dimensions and Pad Layout

    HCM1A0805V2-1R0-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10902: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    How to Read These Ratings

    AEC-Q200 qualified, molded, magnetically shielded, and rated to +155 °C ambient plus self-heating. The automotive grading is not a label on a commercial part: the test regime covers thermal shock, vibration and moisture, and the data sheet quotes the parameters at the temperature extremes the qualification demands.

    Copper loss at the rated current works out to roughly 0.784 W from a typical DCR of 4 mOhm at 14 A. It is the number to start a thermal stack-up with, before core loss and before AC resistance rise.

    The Isat column is 20% rolloff @ +25 °C. Note what it does and does not mean: it is a defined rolloff point, not a destruction limit. Above it the inductance continues to fall, which is why the transient peak current should be checked against the curve, not just against the number.

    Energy storage at the saturation current is around 112 uJ, the number that connects the inductance and the current rating into a single transient figure.

    K-factor 265 means the flux swing is about 265 Gauss per amp of ripple. Core loss scales with the flux amplitude and the frequency, so this is the number to carry into the loss calculation rather than the inductance alone.

    Self-resonant frequency is 40 MHz typical. Above that the part becomes capacitive and stops behaving as an inductor, which is why the switching frequency and its first harmonics should stay well below it.

    What This Family Is For

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    The HCM1A0805V2 family spans 0.22 uH to 47 uH; this row sits at position 4 of 12.

    The next value up in the same family, HCM1A0805V2-2R2-R, gives 2.2 uH at 10.5 A and DCR 7 mOhm: the extra inductance costs about 6.5 A of rated current.

    • Core material: alloy powder core, 8.4 x 8 mm body at 5.4 mm.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting and led lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Putting It to Work

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 4.8 mOhm becomes roughly 7.35 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Confirm the revision letter (base / V2 / V3) before comparing electrical rows.
    • Confirm the revision letter (base / V2 / V3) before comparing electrical rows.
    • Confirm the qualification file covers the module-level test plan.

    Frequently Asked Questions

    What is the operating temperature range?
    The rated range is quoted as ambient plus self-temperature rise, up to the maximum shown in the table. The part is qualified across that span, but the hot corner is where saturation and DCR must be checked.

    What does AEC-Q200 cover?
    The qualification regime for passive components in automotive use: thermal shock, temperature cycling, vibration, mechanical shock, moisture resistance and solderability, among others. It qualifies the construction, not the board design.

    What is the self-resonant frequency used for?
    It marks the point where the winding capacitance dominates. Keep the switching frequency and the harmonics that carry energy below it, and use it to compare candidates of the same inductance.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products