Eaton HCM1A1104-R45-R AEC-Q200 Inductor 0.45 uH, Isat 32 A
Eaton HCM1A1104-R45-R AEC-Q200 Inductor 0.45 uH, Isat 32 A

Eaton HCM1A1104-R45-R AEC-Q200 Inductor 0.45 uH, Isat 32 A

Share
Eaton HCM1A1104-R45-R: AEC-Q200 automotive power inductor, 0.45 uH ±20%, 25 A Irms, Isat 32 A, DCR 1.07 mOhm, 11.5 x 10.3 mm.
    • Product Details
    • Download

    Eaton HCM1A1104-R45-R AEC-Q200 Inductor 0.45 uH, Isat 32 A

    HCM1A1104-R45-R at a glance: AEC-Q200 automotive power inductor, 0.45 uH ±20%, 25 A Irms, Isat 32 A (20% rolloff @ +25 °C), DCR 1.07 mOhm, 11.5 x 10.3 mm.

    Key Specifications

    ParameterValue
    Orderable part numberHCM1A1104-R45-R
    OCL (open circuit inductance)0.45 uH ±20%
    FLL minimum, at Isat0.29 uH
    Irms (DC, 40 °C rise)25 A
    Isat (20% rolloff @ +25 °C)32 A
    DCR typical @ +20 °C1.07 mOhm
    DCR maximum @ +20 °C1.23 mOhm
    K-factor (Bp-p = K x L x dI)490, Bp-p in Gauss
    Package11.5 x 10.3 mm
    Height4.0 mm
    MountingSurface mount
    Operating temperature-55 °C to +155 °C (ambient plus self-heating)
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10550

    Mechanical Drawing

    HCM1A1104-R45-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10550: outline with
    rated mm dimensions, recommended pad layout and winding schematic. Tolerances are stated on
    the drawing itself.

    The Figures Explained

    Automotive power rails ask for two things a commercial inductor does not always give: a qualified construction and a saturation curve that is still usable at the hot corner. The molded powder core here provides both, with AEC-Q200 qualification and a soft rolloff that keeps inductance present at transient peak current.

    With 1.07 mOhm typical, the I-squared-R loss at the full 25 A rating is about 0.669 W. Compare that against the converter output power before deciding whether the part needs airflow or a copper pour under it.

    Saturation is quoted as 20% rolloff @ +25 °C. At that point the inductance has fallen to the stated fraction of its nominal value – the part is not damaged there, it simply stops behaving like the inductance on the label. Design the peak current to stay inside that boundary with margin for tolerance.

    Stored energy at Isat is about 230 uJ, which is the energy the inductor hands to the load during a transient before the control loop reacts.

    With K = 490, a peak-to-peak ripple of one amp produces roughly 220 Gauss of flux swing. Read the core-loss graph at that amplitude and at the switching frequency to get the core contribution to the total loss.

    Series Positioning

    The HCM1A family is the automotive molded range: AEC-Q200 qualified, rated to +155 °C, from a 5 mm footprint up to a 22 mm body. Several sizes carry a V2 or V3 revision with a higher current rating or an extra saturation column, so the revision letter is part of the specification.

    The HCM1A1104 family spans 0.2 uH to 100 uH; this row sits at position 3 of 19.

    One step down the table, HCM1A1104-R36-R, sits at 0.36 uH with 26 A and 1.04 mOhm – the lower inductance buys about 2.5 A of extra current in the same body.

    • Core material: alloy powder core, 11.5 x 10.3 mm body at 4.0 mm.
    • Typical applications: body electronics; central body control module; vehicle access control system; headlamps, tail lamps and interior lighting; heating ventilation and air conditioning controllers (hvac); doors, window lift and seat control.
    • The +155 °C rating is ambient plus self-temperature rise. Derate against the hot DCR, not the +20 °C value, when the board sits in a warm enclosure.

    Sizing It Into a Design

    Copper resistance rises with temperature, so at the +155 °C limit the maximum DCR of 1.23 mOhm becomes roughly 1.88 mOhm. That is the figure to put into a hot-enclosure loss calculation; the +20 °C column is a bench number.

    Design note: the revision letter changes the electrical row. V2 and V3 parts of the same body size are not drop-in substitutes for the base part; compare the tables row by row.

    • Verify the qualification and the mounting process match the assembly line.
    • Confirm the revision letter (base / V2 / V3) before comparing electrical rows.
    • Confirm the revision letter (base / V2 / V3) before comparing electrical rows.

    Frequently Asked Questions

    What does AEC-Q200 cover?
    The qualification regime for passive components in automotive use: thermal shock, temperature cycling, vibration, mechanical shock, moisture resistance and solderability, among others. It qualifies the construction, not the board design.

    Is the part shielded for ADAS modules?
    The molded powder core encloses the winding, so the radiated field is small. That is why the family is used next to sensor front ends and camera interfaces.

    What is the operating temperature range?
    The rated range is quoted as ambient plus self-temperature rise, up to the maximum shown in the table. The part is qualified across that span, but the hot corner is where saturation and DCR must be checked.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products